Pcl Emulation Commands; Pcl Emulation Commands By Function - Lexmark J110 Reference Manual

PCL Emulation Commands

See the following tables for a listing of the commands grouped by function.
To determine which commands your printer supports, see Table A-1: "PCL Emulation
Commands" on page A-1.

PCL Emulation Commands by Function

Table 2-14: Job Control
Command / Parameters
ESC
E
ESC
&d#A
0 = Collation off
1 ... 999 (number of Copies)
l
ESC
& #X
# = number of Copies (1 to 32767)
Default = 1
l
ESC
& #S
0 Single-Sided (Default)
1 Duplex Long-Edge Binding
2 Duplex Short-Edge Binding
l
ESC
& #U
# = number of Decipoints
Range = -32767 to 32767
(1 Decipoint = 1/720 inch)
Default = 0
l
ESC
& #Z
# = number of Decipoints
Range = -32767 to 32767
(1 Decipoint = 1/720 inch)
Default = 0
2-25
Function / Result
Printer Reset
• Prints any partial pages.
• Resets printer environment to defaults.
• Deletes all temporary downloaded resources.
Number of Collated Copies
Turns collation of pages off or sets the number of collated copies.
Number of Copies
Affects the page currently in process and subsequent pages.
Simplex/Duplex Print
Long-edge or short-edge binding refers to the side of the physical
page where binding occurs.
Long-Edge Offset Registration
Also known as Left Offset.
Adjusts placement of logical page along the width of the physical
page.
Short-Edge Offset Registration
Also known as Top Offset.
Adjusts placement of logical page along the length of the physical
page.
PCL