Redialing - Sony SPP-SS961 Operating Instructions Manual

If the battery becomes weak during a call
The handset will beep every three seconds and i and "BATTERY
LOW" appears on the display. Finish your call and charge the battery
pack.
For optimum performance, charge the battery for a full 12 hours.
Note that during the first 10 - 15 minutes of charging, the phone will be
inactive, i.e., unable to make or receive a call.
After this initial 10 - 15 minutes, you may be able to use the phone, but
the battery duration will be very short; thus it is recommended that
you fully charge the battery before next use.

Redialing

1
Press (TALK) and wait until "TALK" appears on the display.
2
Press (REDIAL) to redial the number last dialed.
Note
If the number exceeds 32 digits, five short error beeps will alert you that the
number can't be dialed.
To check the phone number before redialing
While the handset isn't in use, press (REDIAL) .
The number last dialed is displayed for five seconds.
To dial the number, press (TALK) while the number is displayed.
Note
The number will not be displayed if the last dialed number exceeds 32 digits or
if it is erased.
To erase the last phone number dialed
While the handset isn't in use, press (REDIAL) twice.
The number will be erased from the memory, and you'll hear a long
confirmation beep.
EN
15
Basics