Siemens SIMATIC NET SCALANCE XR124WG Manual page 12

English
Issued approvals
The specified approvals apply only
when the corresponding mark is printed
on the product.
EU declaration of conformity
You will find EU declaration of
conformity for these products on the
Internet pages of Siemens Industry
Online Support:
https://support.industry.siemens.com/cs/
ww/en/ps/24185/cert
The products meet the requirements of
the following directives:
• ATEX
• EMC
• RoHS
You will find further information in the
following sections.
The current versions of the standards
can be seen in the EU Declaration of
Conformity.
ATEX
EC directive 2014/34/EC „Use in
potentially explosive atmospheres"
Some of the IE switches (see type
plate) meet the requirements according
to II 3 G Ex nA IIC T4 Gc,
certificate no.: KEMA 07ATEX0145 X
taking into account the standards:
• EN 60079-15
• EN 60079-0
You can find the current versions of the
standards in the currently valid ATEX
certificates.
A5E39701956-AB, 09/2017
Issued approvals
IECEx
Some of the IE switches (see type
plate) meet the requirements for
explosion protection according to
IECEx as per Ex nA IIC T4 Gc,
certificate no.: DEK 14.0025X taking
into account the standards:
• IEC 60079-15
• IEC 60079-0
You can find the current versions of the
standards in the currently valid IECEx
certificates.
EMC
EC directive 2014/30/EC
"Electromagnetic Compatibility"
• Immunity: EN 61000-6-2
• Emission: EN 61000-6-4
RoHS
EC directive 2011/65/EC "restriction of
the use of certain hazardous
substances"
• EN 50581
FM
• Factory Mutual Approval Standard
Class Number 3611
• FM Hazardous (Classified)
Location Electrical Equipment:
Non Incendive / Class I / Division 2
/ Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 /
Group IIC / T4

Continued