PIAGGIO MP3 400 hpe E5 2021 Service Manual page 72

Engine
Inspecting the hub cover
- Check that the fitting surface is not dented or dis-
torted.
- Check the bearing bearings.
- In case of faults, replace the damaged compo-
nents.
- Check the thorough cleaning of lubrication duct.
Refitting the hub cover bearings
REMOVAL
Wheel axle bearing removal
- Remove the Seeger ring.
- Using the specific tools, support the hub cover.
- Using the specific tools remove the bearing.
N.B.
TO FIT THE BEARING ON THE COVER, ADEQUATELY
SUPPORT THE COVER WITH THE STUD BOLT KIT.
Specific tooling
020489Y Hub cover support stud bolt kit
020376Y Adaptor handle
020357Y 32 x 35-mm Adaptor
020483Y 30-mm guide
- Remove the hub cover from the stud bolts and
using the specific tools pull out the oil seal.
Specific tooling
020376Y Adaptor handle
020359S 42 x 47 mm Adaptor
ENG - 72
MP3 400 hpe E5