Table of Contents
Advertisement
Engine
- Using a screwdriver, remove the seal ring from
the flywheel cover.
- Check that the shaft housing hole on the crank-
case does not show abnormal wear. Make sure the
ceramic seal seat does not show signs of scoring.
Check the cleaning of the drain and lubrication
holes.
Fitting
- Lubricate the new seal ring with grease and insert
it in the flywheel cover.
Specific tooling
020376Y Adaptor handle
020375Y 28 x 30 mm adaptor
ENG - 122
MP3 400 hpe E5
Hide quick links:
Advertisement
Table of Contents
