The Front Panel - Lexicon CP-1 Owner's Manual

Controls and
Indicators

The Front Panel

exicon
DIGITAL AUDIO ENVIRONMENT PROCESSOR
I II
SOURCE TAPE
SOURCE MONITOR
Monitor
Input Level
Alphanumeric
Display
Indicator
Page 2
PRE POST
INPUT LEVEL
TAPE
Source
The SOURCE buttons select one of two identical stereo pairs of audio
inputs. Ordinarily Input I will be connected to the main outputs of your
stereo preamp and the second input will be a spare. In video installations,
Input I will be connected to the main audio outputs of your TV receiver,
VCR or audio/video control center. Input II can then accept the outputs of
a separate system or the audio outputs of a video disc or CD player.
The MONITOR button selects SOURCE I/II or TAPE IN. The Tape inputs
are provided to accommodate a recorder if the CP-1 occupies a previously
used tape monitor loop.
Tape
The PRE and POST Tape switch determines whether CP-1 processing if
applied before or after tape output. PRE means that the tape deck gets the
signal unaltered (PRE-processing); POST applies CP-1 processing to the
tape output (POST-processing).To record CP-1 processing onto tape the
CP-1 must be in the two-speaker mode (Configuration 1) with the POST
button engaged.
The INPUT LEVEL control and its display allow you to match the level of
the incoming signal to the CP-1's digital encoding circuits. When correctly
set, loud passages will light the entire row of green LEDs without flashing
the red ones.
The alphanumeric display shows both the program that is running and its
modifiable parameters. The CP-1 has 24 registers: PRESETs 1-12 are
configured at the factory; those labeled USER 1-12 are available for storage
of programs customized by the user.
The unlabeled LED to the left of the System Mute Indicator lights when the
CP-1 detects a signal from the remote control. The SYSTEM MUTE LED
Lights
indicates that unprocessed audio is no longer passing through to the CP-1's
main outputs. The EFFECT MUTE LED indicates that the CP-1's processed
audio is no longer passing through to its outputs.
Power
System On/Off.
Lexicon
CP-1
SYSTEM EFFECT POWER
MUTE MUTE
TITLE: dlby lgo 2
CREATOR: Adobe Illustrator(TM) 1.1
CR DATE: 6/20/88 3:52 PM