The First Wash Cycle - Hotpoint WMD 940 P Instructions For Use Manual

Hide thumbs Also See for WMD 940 P:
Table of Contents

Advertisement

As the colours of the wires in the lead may not
As the colours of the wires in the lead may not
GB
GB
correspond with the coloured markings identifyng
correspond with the coloured markings identifyng
the terminals in your plug, proceed as follows:
the terminals in your plug, proceed as follows:
Connect Green & Yellow wire to terminal marked E
Connect Green & Yellow wire to terminal marked E
or
or
or coloured Green or Green & Yellow.
or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked L or
Connect Brown wire to terminal marked L or
coloured Red.
coloured Red.
Connect Blue wire to terminal marked N or coloured
Connect Blue wire to terminal marked N or coloured
Black.
Black.
If a 13 amp plug (BS 1363) is used it must be fitted
If a 13 amp plug (BS 1363) is used it must be fitted
with a
with a
13 amp fuse, either in the plug or adaptor or at the
13 amp fuse, either in the plug or adaptor or at the
distribution board.
distribution board.
If you are in any doubt the electrical supply to your
If you are in any doubt the electrical supply to your
machine, consult a qualified electrician before use.
machine, consult a qualified electrician before use.
How to connect an alternative plug:
How to connect an alternative plug:
The wires in this mains lead are coloured in
The wires in this mains lead are coloured in
accordance with the following code:
accordance with the following code:
B L U E
B L U E
B R O W N
B R O W N
GREEN & YELLOW
GREEN & YELLOW
Disposing of the appliance:
Disposing of the appliance:
When disposing of the appliance please remove the
When disposing of the appliance please remove the
plug by cutting the mains cable as close as possible to
plug by cutting the mains cable as close as possible to
the plug body and dispose of it as described above.
the plug body and dispose of it as described above.
GREEN &
GREEN &
YELLOW
YELLOW
BROWN
BROWN
BLUE
BLUE
!
!
The washing machine should not be installed in an
The washing machine should not be installed in an
outdoor environment, not even when the area is
outdoor environment, not even when the area is
sheltered, because it may be very dangerous to
sheltered, because it may be very dangerous to
leave it exposed to rain and thunderstorms.
leave it exposed to rain and thunderstorms.
!
!
When the washing machine is installed, the mains
When the washing machine is installed, the mains
socket must be within easy reach.
socket must be within easy reach.
!
!
Do not use extensions or multiple sockets.
Do not use extensions or multiple sockets.
!
!
The power supply cable must never be bent or
The power supply cable must never be bent or
dangerously compressed.
dangerously compressed.
!
!
The power supply cable must only be replaced by
The power supply cable must only be replaced by
an authorised serviceman.
an authorised serviceman.
4
4
NEUTRAL (N)
NEUTRAL (N)
LIVE (L)
LIVE (L)
EARTH (E)
EARTH (E)
13 ampere fuse
13 ampere fuse
CROSS-BAR
CROSS-BAR
CORD GRIP
CORD GRIP
Warning! The company denies all liability if and
Warning! The company denies all liability if and
when these norms are not respected.
when these norms are not respected.

The first wash cycle

The first wash cycle
Once the appliance has been installed, and before
Once the appliance has been installed, and before
you use it for the first time, run a wash cycle with
you use it for the first time, run a wash cycle with
detergent and no laundry, using the wash cycle
detergent and no laundry, using the wash cycle
.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wmd 940 gWmd 940 aWmd 940 k

Table of Contents