KitchenAid KOSE500ESS Control Manual page 5

Display
When power is first supplied to the oven, the timer display will
flash "12:00", and "Clock-Enter Time" will appear on the display.
Enter the time by touching the number keys. Touch START to
allow operation. To allow operation without setting a time, touch
START or CANCEL.
Oven Display
When the oven(s) are in use, this display shows the oven
temperature, heat source(s) and start time. On double oven
models, this display will also show which oven is being set. The
upper cavity symbol represents the upper oven; the lower cavity
symbol represents the lower oven.
In addition, during Timed Cooking, this display shows a time
countdown and the stop time (if entered).
Time of Day, Timer Display
When the oven(s) are not in use, this display shows the time of
day or Timer countdown.
Tones
Tones are audible signals, indicating the following:
One beep
� Valid key touch
� Function has been entered
One chime
� Preheat cycle has been completed
Three beeps
� Invalid key touch
Three chimes
� End of a cooking cycle
Four chimes
� When timer reaches zero
Includes using the Kitchen Timer for functions other than
cooking.
Tone Volume
The volume is preset at low, but can be changed to high.
To Change: Touch TOOLS or CLOCK/TOOLS depending on you
model, and then "4" to toggle volume between high and low
settings.
All Tones
All tones are preset on, but can be turned off.
To Turn Off/On: Touch TOOLS or CLOCK/TOOLS depending on
you model, and then "3" to toggle tones between on/off settings.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset
on, but can be turned off. If all tones have been turned off, the
end-of-cycle and reminder tones cannot be independently turned
on.
To Turn Tones Off/On: Touch TOOLS or CLOCK/TOOLS
depending on you model, and then "5" to turn On. Touch TOOLS,
and then "5" to turn Off.
NOTE: Turning off this reminder tone does not turn off the Kitchen
Timer tone.
Fahrenheit and Celsius
The temperature is preset in Fahrenheit; however it can be
changed to Celsius.
To change: Touch TOOLS, and then "2" to toggle temperature
between Fahrenheit and Celsius settings.
When the temperature is in Fahrenheit, "°F" follows the oven
temperature.
When the temperature is in Celsius, "°C" follows the oven
temperature.
Tools
The Tools selection key allows you access to 9 hidden functions
within the Electronic Oven Control. These hidden functions allow
you to set the clock, change the oven temperature between
Fahrenheit and Celsius, turn the audible signals and prompts on
and off, and adjust the oven calibration, change the language, and
turn on the Demo Mode.
The Sabbath Mode is also set using the Tools selection key.
To Use: Touch CLOCK/TOOLS. The oven display will scroll
through the various tools, starting at "1" and ending automatically
at "9." You can also touch the Tools key repeatedly to manually
scroll through the list of tools.
TOOLS HIDDEN FUNCTION
1 Clock
2 Fahrenheit and Celsius conversion
3 Sound On/Off
4 Sound High/Low
5 End tone On/Off
6 Calibration
7 Sabbath
8 Language
9 Demo Mode
Clock
This is a 12-hour clock. Before setting, make sure the oven(s),
Kitchen Timer, and Timed Cooking are off.
To Set:
1. Touch CLOCK/TOOLS.
2. Touch the "1" key.
3. Select Clock, and then touch the number keys to set the time
of day.
4. Touch CLOCK/TOOLS or START.
Timer/Kitchen Timer
The Timer/Kitchen Timer can be set in minutes and seconds or
hours and minutes, and counts down the set time.
NOTE: The Timer/Kitchen Timer does not start or stop the oven.
Control Lock
The Control Lock shuts down the control panel keys to avoid
unintended use of the oven(s). The Control Lock will remain set
after a power failure, if set before the power failure occurs. When
the control is locked, only the Start, Timer Set/Off and Oven Light
keys will function.
The Control Lock is preset unlocked, but can be locked.
To Lock Control: Touch and hold START for approximately 3
seconds, until "Control Locked" appears on the lower text line and
a lock icon appears in the display.
To Unlock Control: Repeat to unlock. "Control Unlocked"
appears on the lower text line and the lock icon will be removed.
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure the oven
temperature. Elements will cycle on and off as needed to maintain
a consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Opening the oven door will affect
cycling of the elements and impact the temperature.
The oven provides accurate temperatures and has been
thoroughly tested at the factory. However, it may cook faster or
slower than your previous oven, causing baking or browning
differences. If necessary, the temperature calibration can be
adjusted in either Fahrenheit or Celsius.
5