Automatic Ice Maker - Electrolux ETB2302J-A User Manual

6.

Automatic Ice Maker

The automatic ice making function pumps water
from the water tank located in the refrigerator
and dispenses it into the automatic ice maker in
the freezer.
The ice will then be dropped into the ice bin
located beneath the ice maker
If the water tank is empty or lower than level, the
ice maker will automatically turn off after 3
attempts at pumping water from the tank. The
ice maker indicator on the user interface shows
the operational status of the ice maker (Refer
control instructions).
Water Tank Refilling
Step 1. Open the lid at the top of the water tank.
Step 2. Pour potable water through the lid at the
top of the water tank.
Step 3. the lid at the top of the water tank.
CAUTION
Do not fill the water tank with anything other than
clean water (Filtered or Mineral water).
Soft drink, juice, tea or hot water etc, can
damage your automatic icemaker.
The water tank can withstand a maximum water
temperature of 60°C.
Tips and Useful Information
Remove and clean ice bin and water tank once a
month, discarding unused ice and water. This
will ensure fresh ice and smooth operatio n of
your icemaker.
Make sure your refrigerator is level to avoid
uneven ice cubes.