Table of Contents
Advertisement
Protocol Type
WAN port
Source IP Address
Source Port
Destination Group
Destination IP Address
Destination Port
DMZ
This section can be accessed from GWN70xx Web GUI → External Access → DMZ.
GWN70xx supports DMZ, where it is possible to specify a Hostname IP Address to be put on the DMZ.
Enabling the DMZ host function, the computer set as the DMZ host can be completely exposed to the Internet, realizing two-
way unrestricted communication.
Refer to the below table for DMZ fields:
DMZ
Destination Group
DMZ Hostname IP Address
UPnP
Select a protocol, users can select TCP, UDP or TCP/UDP.
Select the WAN port
Sets the IP address that external users access to this device. If not set, any IP address on the
corresponding WAN port can be used
Set a single or a range of Ports.
Select VLAN group.
Set the destination IP address.
Set a single or a range of Ports.
Table 21: Port Forward
Figure 68: DMZ Page
Click on "ON" to enable DMZ
Select the LAN group.
Set the destination IP address.
Table 22: DMZ
Advertisement
Table of Contents
