Grandstream Networks GWN70 Series User Manual page 30

Please refer to the below table for Wi-Fi Settings tab options.
Field
Wi-Fi
Name
Associated VLAN
SSID Band
Security Mode
WPA Key Mode
WPA Encryption Type
Figure 42: Add SSID Tab
Description
Click on "ON" to enable the SSID
Set or modify the SSID name.
Click on "ON" to enable VLAN, then specify the VLAN from the list or Create VLAN.
Select the Wi-Fi band the GWN will use, three options are available:
● Dual-Band
● 2.4GHz
● 5GHz
Set the security mode for encryption, 6 options are available:
● WPA/WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with "AES" or "AES/TKIP" Encryption Type.
● WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with "AES" or "AES/TKIP" Encryption Type.
Recommended configuration for authentication.
● Open: No password is required. Users will be connected without authentication. Not recommended for
security reasons.
● WPA2/WPA3: WPA2: Using "SAE-PSK" or "802.1x" as WPA Key Mode, with "AES" or "GCMP-128"
Encryption Type. Recommended configuration for authentication.
● WPA3: Using "SAE" or."802.1x" as WPA Key Mode, with "AES" or "GCMP-128" Encryption Type.
Recommended configuration for authentication.
● WPA3-192: Using "802.1x" as WPA Key Mode, with "GCMP-256" or "CCMP-256" Encryption Type.
Recommended configuration for authentication.
Two modes are available:
● PSK: Use a pre-shared key to authenticate to the Wi-Fi.
● 802.1X: Use a RADIUS server to authenticate to the Wi-Fi.
Two modes are available:
● AES: This method changes dynamically the encryption keys making them nearly impossible to circumvent.