Rx refrigeration, bx hvac, and cx convenience store controllers (42 pages)
Summary of Contents for Emerson E2
Page 1
Controller for 527-0359 This document will guide you through setting up and commissioning the Carrier Corpora- tions RTU Open Controller in the E2 controller (CARRIER OPN-RTUM Open Echelon device in the E2). Note that Open Echelon Description files require E2 firmware version 3.01FO1 or higher.
Page 4
9 (Licensing). 6. Press F1 (ADD FEATURE) and enter your license key. Figure 4 - Add License Screen STEP 3: Once the license is activated, add the device to the E2 controller. 7. Press , 7 (System Configuration), 7 (Network Setup), 2 (Connected I/O Boards &...
Page 8
14. Enter the desired device name in the Name field highlighted and then press the return to the Network Summary screen. NOTE: By default, any Third Party (Open Echelon) devices that are initiated in E2 will always have a generic naming sequence as shown:...
Page 10
. The device Status Screen displays. NOTE: By default, if there are one or more devices of the same type configured in E2, a list of all common devices will display (Summary Screen) in reference to the numeric or alphanu- meric character sequence of the devices labeled.
Page 14
The contents of this publication are presented for informational purposes only and they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. Emerson Climate Technologies Retail Solutions, Inc. and/or its affiliates (collectively Emerson), reserves the right to modify the designs or specifications of such products at any time without notice.