Table of Contents
Advertisement
E71948
3.
Install the locking wheel nut key.
1
3
5
E75442
4.
Partially tighten the wheel nuts in the
sequence shown.
5.
Lower the vehicle and remove the
jack.
6.
Fully tighten the wheel nuts in the
sequence shown. See Technical
specifications (page 120).
7.
Install the hub cap or cover using the
ball of your hand.
Wheels and tyres
checked as soon as possible.
Note: If the spare wheel is different in
size or construction to the road wheels,
have this replaced as soon as possible.
TYRE CARE
E70415
To make sure the front and rear tyres of
your vehicle wear evenly and last longer,
we recommend that you swap the
4
tyres from front to rear and vice versa at
regular intervals of between 5,000 and
10,000 kms.
2
If you have to mount a kerb, do so slowly
and approach it with the wheels at
right-angles to the kerb.
Examine the tyres regularly for cuts,
foreign objects and uneven wear of the
tread. Uneven wear could mean that the
wheel alignment is outside specification.
Check the tyre pressures (including the
spare) when cold, every two weeks.
-118-
WARNING
Have the wheel nuts checked for
tightness and the tyre pressure
CAUTION
Do not scrub the sidewalls of
the tyres when you are parking.
Advertisement
Table of Contents
