Table of Contents
Advertisement
Do not work underneath the
vehicle when it is supported only
by a jack.
Make sure that the jack is vertical
to the jacking point and the base
is flat on the ground.
CAUTION
Do not lay alloy wheels face down
on the ground, this will damage
the paint.
Note: The spare wheel is located
under the floor cover in the luggage
compartment.
1.
Insert the flat end of the wheel brace
between the rim and the hub cover
and carefully remove the hub cap or
cover.
E71948
2.
Install the locking wheel nut key.
3.
Slacken the wheel nuts.
4.
Jack up the vehicle until the tyre is
clear of the ground.
5.
Remove the wheel nuts and the
wheel.
Wheels and tyres
Installing a road wheel
could damage the vehicle and will make
the National Type Approval invalid. See
Technical specifications (page 120).
them. Please contact your dealer for
more details regarding compatibility.
steel wheels.
Note: Make sure the wheel and hub
contact surfaces are free from foreign
matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1.
2.
-117-
WARNINGS
Use only approved wheel and
tyre sizes. Using other sizes
Do not fit run flat tyres on vehicles
that were not originally fitted with
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
Install the wheel.
Install the wheel nuts finger tight.
Advertisement
Table of Contents
