Advertisement
Quick Links
Bifold Glass Door models:
BVX2BL-1
BVX36BL-1
BVX3BL-1
f i r e - p a r t s . c o m
IMPORTANT: Please read these instructions carefully before starting
the installation. Failure to follow these installation instructions may re-
sult in a possible fire hazard and will void the warranty. These instruc-
tions must be left with the appliance for future reference.
IMPORTANT NOTICES
1. Be sure these instructions become the property of, and are reviewed by, all future users of
the fireplace to encourage proper installation and operation of the glass doors.
2. Read these instructions entirely before beginning the installation. Save the instructions for
future reference.
3. All parts used with the fireplace system must be installed in accordance with these instal-
lation instructions. Failure to do so may be hazardous and will void the warranty.
4. Check to make sure all parts are included prior to assembly. See parts list on page 4 for
reference.
5. Tools needed for installation includes standard and Phillips screwdrivers, and a 5/16" nut-
driver.
6. Caution: sharp edges. Wear gloves and safety glasses when installing the glass door com-
ponents.
7. Decorative non-combustible trim or finishing materials must not extend beyond the firebox
side openings. Any materials that extend past the firebox side opening will interfere with
the operation of the glass doors.
8. Bifold doors must be in the fully open position when operating the fireplace.
19481-2-0115
Operation Instructions
(For use with (A)BVD34FP Fireplace model series)
(For use with (A)BVD36FP Fireplace model series)
(For use with (A)BVP42FP Fireplace model series)
Installation and
GAS-FIRED
UL FILE NO. MH45034
Page 1
Advertisement
Related Manuals for Empire Comfort Systems BVX2BL-1
Summary of Contents for Empire Comfort Systems BVX2BL-1
- Page 1 Installation and Operation Instructions Bifold Glass Door models: GAS-FIRED BVX2BL-1 (For use with (A)BVD34FP Fireplace model series) BVX36BL-1 (For use with (A)BVD36FP Fireplace model series) BVX3BL-1 UL FILE NO. MH45034 (For use with (A)BVP42FP Fireplace model series) f i r e - p a r t s . c o m IMPORTANT: Please read these instructions carefully before starting the installation.
- Page 2 INSTALLATION 1. Pre-install the two glass door spring clips at each end 3. Install the Canopy by first removing the upper louver of the top door track as shown in Figure 1. Use four assembly (if applicable). Flush face fireplace models #8 x ½”...
- Page 3 INSTALLATION 5. Install the Right Bifold Door assembly as shown in Fig- 6. Repeat step 5 to install the Left hand Bifold Door as- ure 4. With the door folded up, insert the bottom door sembly. Make adjustments as necessary on the bifold pivot pin into the receiving hole located in the firebox doors to achieve the best alignment and operation. bottom return flange. Swing the top of the door assem- Figure 5 shows the completed installation of the bifold bly outward and engage the top pivot pin into the hole doors and canopy. located in the spring clip. Adjust the spring clip left or right with the door in the open position, then snug the spring clip screws as necessary to check door align-...
- Page 4 MAINTENANCE • Do not use abrasive cleaners on the glass, trim, or canopy components. Abrasive cleaners will harm the finish and could weaken the tempering qualities of the glass. • When cleaning is necessary, use only a soft cloth, mild soap and water. Painted surfaces should only be cleaned with a soft, damp cloth. Always let the glass doors completely cool prior to cleaning. • Repair or replacement parts are available through your dealer. Refer to the exploded parts illustration for identification. EXPLODED VIEW AND PARTS LIST f i r e - p a r t s . c o m Index No. Part No. Description BVX2BL BVX36BL BVX3BL 19485 19497 19502 Bifold Door Ass’y, Left 19484 19496 19501...