Table of Contents
Advertisement
Handlebar
Fork Cover
Rear of Trike
9
• Insert the fork post up through the hole in the neck of the frame.
Make sure the fork is positioned so that the fork covers face
the rear wheels.
• Place the handlebar onto the fork post and push it down onto
the frame. Make sure the handlebar is positioned so that the
screw hole faces the rear wheels and aligns with the screw hole
in the fork post.
Hint: You may need to rotate the handlebar to align the holes.
• Insert the 7,6 cm screw through the hole in the handlebar and
into the fork post so that part of the screw (about 1,9 cm) is still
visible. Tighten the screw.
Cap
10
• Insert and "snap" the cap into the hole in the frame.
Assembly
Headlight
Cover
Frame
Neck
Fork Post
11
• Fit the headlight cover onto the front of the handlebar.
• Insert three 1,3 cm screws into the headlight cover. Tighten
the screws.
12
• Position the seat upside down.
• Fit the small pegs on the seat retainer into the holes in the seat.
5
Seat Retainer
Peg
Cheville
Seat
Advertisement
Table of Contents
