Related Manuals for Avalue Technology EZX-EHLP
Summary of Contents for Avalue Technology EZX-EHLP
- Page 1 EZX-EHLP Intel® Elkhart Lake 1.8” SBC User’s Manual Ed –16 August 2022 Part No. E2047EZHP00R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
- Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EZX-EHLP User’s Manual...
-
Page 5: Table Of Contents
3.6.2 Advanced Menu ..........................29 3.6.2.1 CPU Configuration ......................... 30 3.6.2.2 Power & Performance ......................31 3.6.2.2.1 CPU – Power Management Control ..................31 3.6.2.2.2 GT – Power Management Control ..................33 3.6.2.3 PCH-FW Configuration ......................33 EZX-EHLP User’s Manual... - Page 6 Save Changes and Reset ...................... 55 3.6.6.4 Discard Changes and Reset ....................55 3.6.6.5 Save Changes ........................55 3.6.6.6 Discard Changes ........................56 3.6.6.7 Restore Defaults ........................56 3.6.6.8 Save as User Defaults ......................56 3.6.6.9 Restore User Defaults ......................56 6 EZX-EHLP User’s Manual...
- Page 7 User’s Manual 4. Drivers Installation....................... 57 Install Chipset Driver ....................58 Install ME Driver ...................... 59 Install VGA Driver ....................60 Install Display Audio Driver ..................61 Install Ethernet Driver ....................63 5. Mechanical Drawing ....................65 EZX-EHLP User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EZX-EHLP motherboard 1 x DC jack power cable ... -
Page 9: Document Amendment History
User’s Manual 1.3 Document Amendment History Revision Date Comment August 2022 Avalue Initial Release EZX-EHLP User’s Manual... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to set up EZX-EHLP or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
(PCI-e x1+USB2.0/USB3), or (SATAIII + USB2.0/USB3), SIM Slot for SSD/LTE/IO Cards) 1 x 10 Pin FPC connector for Micro SIM card adapter eMMC Onboard eMMC 5.1 64GB Edge I/O 1 x Intel® I210AT Gigabit Ethernet EZX-EHLP User’s Manual 11... - Page 12 Single power ATX Support S0, S3, S4, S5 ACPI ACPI 5.1 Compliant Power Mode AT / ATX mode Switchable Through Jumper 0~60°C, w/HDD/SSD, ambient with 0.5 m/s Air flow Elkhart Lake N/J Series CPU Operating Temp. 12 EZX-EHLP User’s Manual...
- Page 13 Q: Why Clear CMOS needs approximately 45sec to complete the whole process? A: Usually clear CMOS is designed with 2.0mm pitch pin header with jumper. But due to EZX-EHLP PCB size is small, its unable to use pin header with jumper, therefore, it has used dip switch as design, but due to unable use 3rd pin on pin header and design 1K to ground to discharge, therefore, EZX-EHLP will requires CPU internal loss after power off for clear CMOS.
-
Page 14: Architecture Overview-Block Diagram
EZX-EHLP User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EZX-EHLP 14 EZX-EHLP User’s Manual... -
Page 15: Hardware Configuration
User’s Manual 2. Hardware Configuration EZX-EHLP User’s Manual 15... -
Page 16: Product Overview
EZX-EHLP User’s Manual 2.1 Product Overview 16 EZX-EHLP User’s Manual... -
Page 17: Jumper And Connector List
BIOS SPI connector 10 x 1 wafer, pitch 1.00mm JUSB1 USB2.0 connector 6 x 2 header, pitch 1.27mm Battery connector 2 x 1 wafer, pitch 1.25mm LAN1 1 x RJ-45 Ethernet USB1 2 x USB3.1 connector EZX-EHLP User’s Manual 17... - Page 18 EZX-EHLP User’s Manual JEDP1 eDP connector 15 x 2 wafer, pitch 1.00mm Mini DP connector (DP++) MDP1 18 EZX-EHLP User’s Manual...
-
Page 19: Setting Jumpers & Connectors
Serial port 2 connector (JCOM1) Signal PIN PIN Signal COM_DCD#_TXN_1 COM_RXD_TXP_1 COM_TXD_RXP_1 COM_DTR#_RXN_1 COM_DSR#_1 COM_RTS#_1 COM_CTS#_1 COM_RI#_1 2.3.2 General purpose I/O connector (JDIO1) Signal PIN PIN Signal DIO_GP20 DIO_GP10 DIO_GP21 DIO_GP11 DIO_GP22 DIO_GP12 DIO_GP23 DIO_GP13 SMB_SCL_S0 SMB_SDA_S0 EZX-EHLP User’s Manual 19... -
Page 20: Power Connector (Pwr1)
EZX-EHLP User’s Manual 2.3.3 Power connector (PWR1) Signal +12V 2.3.4 USB2.0 connector (JUSB1) Signal PIN PIN Signal +V5A_USB_PH 12 USB_R_DP5 USB_R_DP4 USB_R_DN5 USB_R_DN4 USB_R_DP3 USB_R_DP2 USB_R_DN3 USB_R_DN2 +V5A_USB34 20 EZX-EHLP User’s Manual... -
Page 21: Bios Spi Connector (Bios_Spi1)
User’s Manual 2.3.5 BIOS SPI connector (BIOS_SPI1) Signal +V3.3A_SPI SPI_CS#0 SPI_CLK SPI_MISO SPI_MOSI SPI_HOLD# SPI_WP# EC_SMDAT_DBG EC_SMCLK_DBG 2.3.6 Battery connector (BT1) Signal +RTCBATT EZX-EHLP User’s Manual 21... -
Page 22: Front Panel Connector (Jfp1)
EZX-EHLP User’s Manual 2.3.7 Front Panel connector (JFP1) Signal PIN PIN Signal FP_HDD_LED+ FP_PWR_LED+ HDD_LED# PWR_LED# PMC_RSTBTN# PWR_BTN_IN_EC# 2.3.8 JESPI connector (JESPI1) Signal PIN PIN Signal ESPI_ALERT#2 ESPI_RST# CN_ESPI_CLK CN_ESPI_IO3 ESPI_CS# CN_ESPI_IO2 PLT_RST_BUF# CN_ESPI_IO1 +V3.3_ESPI CN_ESPI_IO0 22 EZX-EHLP User’s Manual... -
Page 23: Edp Connector (Jedp1)
EDP_Panel_TXN0 EDP_Panel_TXN3 EDP_Panel_TXP0 EDP_Panel_TXP3 EDP_Panel_TXN1 EDP_Panel_TXP1 11 12 EDP_Panel_AUXN 14 EDP_Panel_AUXP EDP_Panel_TXN2 15 EDP_Panel_TXP2 17 SOC_DDI0_HPD +V3.3S_eDP +V3.3S_eDP PWM_VBRIGHT BKLEN +V12S_INV +V12S_INV Note: Mainboard Connector: Aces 50238-03071-003 or Equivalent User Side Connector: WELL-LIN 1010-H-2X15P or Equivalent EZX-EHLP User’s Manual 23... -
Page 24: Bios Setup
EZX-EHLP User’s Manual 3.BIOS Setup 24 EZX-EHLP User’s Manual... -
Page 25: Introduction
If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. EZX-EHLP User’s Manual 25... -
Page 26: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 26 EZX-EHLP User’s Manual... -
Page 27: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. EZX-EHLP User’s Manual 27... -
Page 28: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 28 EZX-EHLP User’s Manual... -
Page 29: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. EZX-EHLP User’s Manual 29... -
Page 30: Cpu Configuration
Item Options Description When enabled, a VMM can utilize the additional Intel (VMX) Virtualization Disabled hardware capabilities provided by Vanderpool Technology Enabled[Default] Technology. All[Default] Active Processor Cores Number of cores to enable in each processor package. 30 EZX-EHLP User’s Manual... -
Page 31: Power & Performance
User’s Manual 3.6.2.2 Power & Performance 3.6.2.2.1 CPU – Power Management Control Item Option Description Boot performance Max Non-Turbo Performance [Default], Select the performance state that the mode Turbo Performance BIOS will set starting from reset vector. EZX-EHLP User’s Manual 31... - Page 32 Enable/Disable processor Turbo Mode Disabled Turbo Mode (requires EMTTM enabled too).AUTO Enabled[Default], means enabled. Enable/Disable CPU Power Disabled[Default], C States Management. Allows CPU to go to C Enabled states when it’s not 100% utilized. 3.6.2.2.1.1 View/Configure Turbo Options 32 EZX-EHLP User’s Manual...
-
Page 33: Gt - Power Management Control
3.6.2.2.2 GT – Power Management Control Item Option Description Disabled RC6(Render Standby) Check to enable render standby support. Enabled[Default], Disable Turbo GT Enabled Enabled: Disables Turbo GT frequency. frequency Disabled[Default] Disabled: GT frequency is not limited. 3.6.2.3 PCH-FW Configuration EZX-EHLP User’s Manual 33... -
Page 34: Firmware Update Configuration
EZX-EHLP User’s Manual 3.6.2.3.1 Firmware Update Configuration Item Option Description Disabled [Default], ME FW Image Re-Flash Enable/Disable Me FW Image Re-Flash function. Enabled 3.6.2.4 Trusted Computing 34 EZX-EHLP User’s Manual... -
Page 35: Acpi Settings
SUSPEND button is S3 (Suspend to RAM)[Default] pressed. 3.6.2.6 IT5571 Super IO Configuration You can use this item to set up or change the IT5571 Super IO configuration for serial ports. Please refer to 3.6.2.6.1 for more information. EZX-EHLP User’s Manual 35... -
Page 36: Serial Port 1 Configuration
EZX-EHLP User’s Manual Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). 3.6.2.6.1 Serial Port 1 Configuration 36 EZX-EHLP User’s Manual... -
Page 37: Ec 5571 Hw Monitor
UART 232 422 485 UART 422 Change the Serial Port as RS232/422/485. UART 485 Auto[Default], Non INT+EXT R INT_EXT R mode EXT R Enable switches for internal and external resistors INT R INT+EXT R 3.6.2.7 EC 5571 HW monitor EZX-EHLP User’s Manual 37... -
Page 38: S5 Rtc Wake Settings
Enable or disable System wake on alarm event. Select Disabled[Default], FixedTime, system will wake on the hr::min::sec specified. Wake system from S5 Fixed Time Select Dynamic Time, System will wake on the current time Dynamic Time + Increase minute(s). 3.6.2.9 Serial Port Console Redirection 38 EZX-EHLP User’s Manual... -
Page 39: Usb Configuration
5 sec The time-out value for Control, Bulk, and Interrupt USB transfer time-out 10 sec transfers. 20 sec[Default] 10 sec 20 sec[Default] USB mass storage device Start Unit command Device reset time-out 30 sec time-out. 40 sec EZX-EHLP User’s Manual 39... -
Page 40: Network Stack Configuration
Optical drives are emulated as ‘CDROM’, Mass Storage Devices Forced FDD Hard Disk drives with no media will be emulated according to CD-ROM a drive type. 3.6.2.11 Network Stack Configuration Item Options Description Enabled Network Stack Enable/Disable UEFI Network Stack. Disabled[Default] 40 EZX-EHLP User’s Manual... -
Page 41: Nvme Configuration
User’s Manual 3.6.2.12 NVMe Configuration 3.6.3 Chipset EZX-EHLP User’s Manual 41... -
Page 42: System Agent (Sa) Configuration
3.6.3.1 System Agent (SA) Configuration Item Option Description Disabled VT-d VT-d capability. Enabled[Default] Enable/Disable above 4GB MemoryMappedIO Above 4GB MMIO BIOS Enabled BIOS assignment. This is enabled automatically assignment Disabled[Default] when Aperture Size is set to 2048MB. 42 EZX-EHLP User’s Manual... -
Page 43: Memory Configuration
User’s Manual 3.6.3.1.1 Memory Configuration 3.6.3.1.2 Graphics Configuration Item Option Description GTT Size Select the GTT Size. 8MB[Default] EZX-EHLP User’s Manual 43... -
Page 44: Pch-Io Configuration
Select the Aperture Size. Note: Above 4GB MMIO BIOS 256MB[Default] assignment is automatically enabled when selecting Aperture Size 512MB 2048MB aperture. To use this feature, please disable 1024MB CSM Support. 3.6.3.2 PCH-IO Configuration 3.6.3.2.1 PCI Express Configuration 44 EZX-EHLP User’s Manual... -
Page 45: Pci Express Root Port 1(M.2 Keyb)
L0s State AUTO – BIOS auto configure ASPM DISABLE – Disables ASPM. L0sL1 Auto Disabled[Default] L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2 Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 EZX-EHLP User’s Manual 45... -
Page 46: Pci Express Root Port 4(Lan1-I210/I211)
L0s State AUTO – BIOS auto configure ASPM DISABLE – Disables ASPM. L0sL1 Auto Disabled[Default] L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2 Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 46 EZX-EHLP User’s Manual... -
Page 47: Sata Configuration
3.6.3.2.2 SATA Configuration Item Options Description Disabled, SATA Controller(s) Enable/Disable SATA Device. Enabled[Default] Disabled [Default], Aggressive LPM Support Enable PCH to aggressively enter link power state. Enabled Disabled, Port 1 Enable or Disable SATA Port. Enabled[Default] EZX-EHLP User’s Manual 47... -
Page 48: Usb Configuration
EZX-EHLP User’s Manual 3.6.3.2.3 USB Configuration Item Options Description Option to enable Compliance Mode. Default is to Disabled[Default] XHCI Compliance Mode disable Compliance Mode. Change to enabled for Enabled Compliance Mode testing. 3.6.3.2.4 HD Audio Configuration 48 EZX-EHLP User’s Manual... -
Page 49: Scs Configuration
Control Detection of the HD-Audio device. Disable = HDA Disabled HD Audio will be unconditionally disabled Enabled = HDA will be Enabled[Default] unconditionally enabled. 3.6.3.2.5 SCS Configuration Item Option Description Disabled eMMC 5.1 Controller Enable or Disable SCS eMMC 5.1 Controller Enabled[Default] EZX-EHLP User’s Manual 49... -
Page 50: Board & Panel Configuration
Select eDP back light PWM duty. 100%[Default] 200[Default] eDP Back Light PWM Select eDP back light PWM Frequency. Frequency Disabled[Default] ErP Function ErP Function (Deep S5). Enabled Off[Default] PWR-On After PWR-Fail AC loss resume. Last state 50 EZX-EHLP User’s Manual... -
Page 51: Security
30 min Disabled Enable/Disabled USB Standby Power USB Standby Power Enabled[Default] during S3/S4/S5. Disabled[Default] SHOW DMI INFO SHOW DMI INFO. Enabled 3.6.4 Security Administrator Password Set setup Administrator Password User Password Set User Password EZX-EHLP User’s Manual 51... -
Page 52: Secure Boot
The mode change requires platform reset. Secure Boot mode options: Standard or Custom. In Standard Custom mode, Secure Boot Policy variables can be Secure Boot Mode Custom[Default] configured by a physically present user without full authentication 3.6.4.1.1 Restore Factory Keys 52 EZX-EHLP User’s Manual... -
Page 53: Key Management
User’s Manual 3.6.4.1.2 Key Management Item Option Description Install factory default Secure Boot keys after the Disabled[Default] Factory Key Provision platform reset and while the System is in Setup Enabled mode. 3.6.5 Boot EZX-EHLP User’s Manual 53... -
Page 54: Save And Exit
65535(0xFFFF) means indefinite waiting. On[Default] Bootup NumLock State Select the keyboard NumLock state Disabled[Default] Quiet Boot Enables or disables Quiet Boot option Enabled Boot Option #1/#2 Set the system boot order. 3.6.6 Save and exit 54 EZX-EHLP User’s Manual... -
Page 55: Save Changes And Exit
Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller. 3.6.6.5 Save Changes Changes made to BIOS settings during this session are committed to NVRAM. The setup program remains active, allowing further changes. EZX-EHLP User’s Manual 55... -
Page 56: Discard Changes
This option saves a copy of the current BIOS settings as the User Defaults. This option is useful for preserving custom BIOS setup configurations. 3.6.6.9 Restore User Defaults This option restores all BIOS settings to the user defaults. This option is useful for restoring previously preserved custom BIOS setup configurations. 56 EZX-EHLP User’s Manual... -
Page 57: Drivers Installation
User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. EZX-EHLP User’s Manual 57... -
Page 58: Install Chipset Driver
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step1. Click Next. Step 4. Setup completed. Step 2. Click Accept. 58 EZX-EHLP User’s Manual... -
Page 59: Install Me Driver
If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next to continue installation. Step 4. Click Finish to complete setup. Step1. Click Next to start installation. Step 2. Click Next. EZX-EHLP User’s Manual 59... -
Page 60: Install Vga Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Start. Step 4. Click Finish to complete setup. Step 1. Click Begin installation. Step 2. Click Next. 60 EZX-EHLP User’s Manual... -
Page 61: Install Display Audio Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Update Drivers. Step 4. Click Next. Step 2. Click Browse my computer for Step 5. Click OK. drivers. EZX-EHLP User’s Manual 61... - Page 62 EZX-EHLP User’s Manual Step 6. Click Open. Step 9. Click Next. Step 10. Click Yes. Step 7. Click Open. Step 8. Click OK. Step 11. Click Close. 62 EZX-EHLP User’s Manual...
-
Page 63: Install Ethernet Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Install Drivers and Software to continue installation. Step 4. Click Next. Step 2. Click Next. Step 5. Click Install. EZX-EHLP User’s Manual 63... - Page 64 EZX-EHLP User’s Manual Step 6. Click Finish to complete setup. 64 EZX-EHLP User’s Manual...
-
Page 65: Mechanical Drawing
User’s Manual 5. Mechanical Drawing EZX-EHLP User’s Manual 65... - Page 66 EZX-EHLP User’s Manual Unit: mm 66 EZX-EHLP User’s Manual...
- Page 67 User’s Manual For thermal solutions: Heatsink assembly EZX-EHLP User’s Manual 67...
- Page 68 EZX-EHLP User’s Manual M.2 module assembly 68 EZX-EHLP User’s Manual...