Selecting Or Changing The Startup Device Sequence; Exiting From The Setup Utility Program - Lenovo ThinkCentre M58e 7268 User Manual

Selecting or changing the startup device sequence

To view or permanently change the configured startup device sequence, do the
following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on
2. Select Startup. Read the information displayed on the right side of the screen.
3. Select the devices for the Primary Startup Sequence, the Automatic Startup
4. Press Esc to return to the Setup Utility program main menu.
5. From the Setup Utility main menu, select Exit → Save Changes and Exit.
If you have changed these settings and want to return to the default settings, select
Load Optimal Settings from the Exit menu.

Exiting from the Setup Utility program

After you finish viewing or changing settings, press Esc to return to the Setup
Utility program menu (you might have to press Esc several times). If you want to
save the new settings, select Exit → Save Changes and Exit. Otherwise, your
changes will not be saved.
52
User Guide
page 49.
Sequence, and the Error Startup Sequence.
Note: You might have to press Esc several times.