2. Locate the MDC connector. See "Identifying parts on the system board" on
Figure 17. Locating the modem daughter card on the system board
3. Disconnect the RJ11 modem cable from the modem card.
4. Remove the two screws that secure the modem card to the system board.
5. Remove the modem card from the system board.
6. Install the new modem card to the MDC connector on the system board by
7. Install the two screws to secure the modem card to the system board.
8. Connect the RJ11 modem cable to the modem card.
22
Hardware Installation and Replacement Guide
page 9. The modem card 1 will be connected to the MDC connector.
aligning the holes in the modem card with the pins in the system board.