Removing The Heat Sink Held In Place By; Replacing The Heat Sink With Screws - Lenovo ThinkCentre A61e 6418 Hardware Installation And Replacement Manual

3. Remove the four screws securing the heat sink to the retention module on the
Figure 8. Removing the heat sink held in place by screws
4. Lift the failing heat sink off the system board.
5. Position the new heat sink on the retention module so that the four screws are
Figure 9. Replacing the heat sink with screws
6. Go to Chapter 4, "Completing the parts replacement," on page 27.
system board.
aligned with the posts on the system board. Tighten the four screws to the heat
sink to the system board.
Chapter 3. Installing options and replacing hardware
15