Brightness Adjustment - Lenovo 3000 H200 5357 User Manual

video capture window. Now, you have successfully configured the Lenovo PC
Bright Eye camera with Lenovo Health Care Software.
5. Select Lenovo Healthcare Software → Bright Vision.
6. Click Distance Setup or Brightness Adjustment to adjust the camera.
3.3.2 Distance Setup
1. Select the display type according to the size of the display used.
2. Select Healthy Viewing Distance Selection to set the distance between the
computer operator and the computer display.
By default, default is selected. You can adjust the viewing distance according to
your requirement.
3. Select Response Time Setting to set the duration of time before an alarm is
given when the distance between the operator and the display is shorter than
the healthy viewing distance.

3.3.3 Brightness Adjustment

1. Adjust the display brightness according to the ambient brightness.
2. There are three levels of ambient brightness: Dim, Moderate, and Bright.
3. When you use the computer for the first time, you should set the proper display
brightness according to each level of ambient brightness.
4. For each level of the ambient brightness, the recommended display brightness
is selected by default. Please adjust your display brightness to a comfortable
level.
5. After the brightness setting is completed, the display brightness will be
automatically changed according to the current level of ambient brightness.
3.3.4 The limitation for the Lenovo Bright Eye Camera
1. Ensure the lens of the camera is exposed and not covered.
2. Ensure your eyes are exposed and not covered.
(The function that detects the distance between the user and monitor is based
on the position of the user's eyes. Therefore, if the eyes are covered or there is a
strong reflection, the distance detection may be affected.)
3. The limitation of the distance detection by the camera:
The minimum distance : about 20CM
The maximum distance: about 70CM
The pitch angle(the face rotary angle scope in the vertical):
26
User Guide
31035089_3000 H_UG_EN.indd 26 2008.8.27 6:05:02 PM