File Management - Lenovo 3000 H200 5357 User Manual

operation. This will ensure that the required space for every recovery
option is available.
Detailed operation procedure (example: Recovering Factory Backup):
1. Power on the computer. When the screen displays the Lenovo picture initially,
press the F2 key on the keyboard to start the Rescue System, where you can
select OneKey Recovery.
2. Select Recover Factory Backup to start the system recovery function.
Note: System Recovery will overwrite all of the data in drive C; In order to
prevent loss of data, be sure to backup relevant data before performing
system recovery.
3. Follow the onscreen instructions, and press E on the keyboard to start recovery
if you are sure you want to recover.
4. Please wait during the process of system recovery. Do not interrupt the
operation during the recovery process.
5. After the system is recovered successfully, the software prompts to restart the
computer. Restart the computer and enter the system.

2.3 File Management

With the File Management module, you may access the critical data in directories
such as Desktop or My Documents in the system partition (usually drive C) when
the system crashes and is irrecoverable. You may then back up such data into
other partitions or external storage devices.
2.3.1 Launch
Turn on the computer. When the Lenovo picture appears on the screen initially,
press the F2 key to launch Rescue System. Then select File Management.
2.3.2 File Backup
Select the file and folder to be copied in the left dialog box, and select the target
folder and drive letter in the right dialog box.
Note: The drive letter of the source file must be different from the target
drive letter.
Then click the copy icon.
Wait while copying.
16
User Guide
31035089_3000 H_UG_EN.indd 16 2008.8.27 6:04:58 PM