Advertisement
Quick Links
BEANSTALK LADDER SHELF
ITEM NO. 25-4681
TIPS
1
Please review all parts and hardware before disposing of any packaging.
2
Check to be sure that all parts and hardware are complete before you start assembly.
3
Before beginning assembly, separate each type of screw.
4
Using a screw that is too long will cause damage.
5
Carefully study the screw diagrams below.
6
You may receive extra hardware with your unit.
7
Place all parts on a clean and smooth surface to avoid the parts from being scratched.
8
Keep the product away from heat and humidity.
9
Light blue stains and natural wood knots on the product are not considered defects.
PART LIST
A
Shelves
4 Pcs
HARDWARE LIST
C
JCBC Screw M6 x 35mm
8 Pcs
PAGE 1 OF 2
B
Back Panel
1 Pc
D
Wall Plug
2 Pcs
Scan Me For Step-By-Step
Real Photo Assembly Instructions
E
Pan Head Tapping Screw
M4 x 38mm
2 Pcs
F
Allen Key M4
1 Pc
Ref : 25-4681/DP/070918
Advertisement
Related Manuals for Natural Signature BEANSTALK 25-4681
Summary of Contents for Natural Signature BEANSTALK 25-4681
- Page 1 BEANSTALK LADDER SHELF ITEM NO. 25-4681 TIPS Scan Me For Step-By-Step Real Photo Assembly Instructions Please review all parts and hardware before disposing of any packaging. Check to be sure that all parts and hardware are complete before you start assembly. Before beginning assembly, separate each type of screw.
- Page 2 BEANSTALK LADDER SHELF ITEM NO. 25-4681 ASSEMBLY INSTRUCTIONS STEP 1 STEP 2 x2 pcs x2 pcs Wall *Marking Point for key holder. x8 pcs STEP 3 STEP 4 Back View Optional View Wall PAGE 2 OF 2 Ref : 25-4681/DP/070918...