Table of Contents
Advertisement
Something not working?
Get user manuals:
See SafeManuals.com
If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling an engineer.
Symptom
The tumble dryer will not start
The results are unsatisfactory
The drying process takes
unusually long
Possible cause
The appliance is not
plugged in
The fuse has blown
The START/PAUSE (START/
PAUZE) button has not
been pressed
No program has been
selected
The door is not properly
closed
The wrong program has
been selected
Fluff filter blocked
Condenser covered with
fluff
The tumble dryer has
been overloaded
Laundry not sufficiently
spun prior to tumble
drying
The vent in the base of
the appliance is covered
A residue may have
formed on the drum
interior, blocking the
sensors
The condenser unit is
covered with fluff
Fluff filter is clogged
Something not working?
Solution
Plug in the appliance
Check the fuse
Press the START/PAUSE
(START/PAUZE) button
Select the required
program
Close the door
Select a different
program
Clean the fluff filter
Clean the condenser
Observe the maximum
loads stated for each
program
Ensure the wash load is
well spun before tumble
drying
Ensure the vent is clear
Clean the inside of the
drum with white vinegar
Clean the condenser unit
Clean the fluff filter
27
Advertisement
Table of Contents
