General Safety Guidelines; Safety Symbols - York Universal LINC485 Installation Manual

Repeater/router
Hide thumbs Also See for Universal LINC485:
Table of Contents

Advertisement

READ BEFORE PROCEEDING!
During installation, operation, maintenance or
service, individuals may be exposed to certain
components or conditions including, but not limited
to: refrigerants, oils, materials under pressure,
rotating components, and both high and low voltage.
Each of these items has the potential, if misused or
handled improperly, to cause bodily injury or death.
It is the obligation and responsibility of operating/
service personnel to identify and recognize these
inherent hazards, protect themselves, and proceed
safely in completing their tasks. Failure to comply
with any of these requirements could result in serious
damage to the equipment and the property in which it
The following symbols are used in this document to alert the reader to areas of potential hazard:
DANGER indicates an imminently
hazardous situation which, if not
avoided, will result in death or
serious injury.
WARNING indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
2
IMPORTANT!

GENERAL SAFETY GUIDELINES

SAFETY SYMBOLS

is situated, as well as severe personal injury or death
to themselves and people at the site.
This document is intended for use by owner-autho-
rized operating/service personnel. It is expected that
this individual possesses independent training that
will enable them to perform their assigned tasks
properly and safely. It is essential that, prior to
performing any task on this equipment, this indi-
vidual shall have read and understood this document
and any referenced materials. This individual shall
also be familiar with and comply with all applicable
governmental standards and regulations pertaining to
the task in question.
CAUTION identifies a hazard which
could lead to damage to the ma-
chine, damage to other equipment
and/or environmental pollution.
Usually an instruction will be given,
together with a brief explanation.
NOTE is used to highlight additional
information which may be helpful to
you.
FORM 450.20-N20 (702)
YORK INTERNATIONAL

Advertisement

Table of Contents
loading

Table of Contents