Calibration Subsystem
CALibration:PEAKing
CALibration:PEAKing[:EXECute]
Peaking is used to obtain the maximum available power and spectral
purity; and the best pulse and FM envelopes at a given frequency.
for a CW frequency. ln general - 1 is returned if there is a problem.
CALibration:PMETer:FLATness:INITiate?
CALibration:PMETer:FLATness:INITiate? USER
Initiates the user flatness calibration. This calibration requires the use of an
external power measurement. Once initiated, the sweeper will setup for the
at which the power is to be measured.
Refer to "Using the User Flatness Correction Commands,
Example Program 8" in Chapter 1 for specific examples of this command.
2-14