Universal Rack Tie-Down Kit; Kit Overview; Kit Contents (Q9V01A); Required Tools - HP G2 Series Installation Manual

Universal Rack Tie-down kit

Kit overview

The Rack Tie-Down kit enables you to secure the racks to the floor.

Kit contents (Q9V01A)

Item
Front tie-down bracket
Rear tie-down bracket
M8 x 20-mm bolt
M8 x 22-mm bolt
M8 flat washer
M8 spring clip

Required tools

The following tools are required for installation:
• Ratchet with sockets
• Adjustable wrench

Installing the Universal Rack Tie-down kit

Procedure
1. Adjust the leveling feet on the rack so that the full weight of the rack rests on the leveling feet.
2. Align the front tie-down brackets with the holes on the front caster plate.
3. Insert and partially tighten four bolts with washers, securing the front tie-down brackets to the front caster plate.
Quantity
2
1
4
4
8
4
Universal Rack Tie-down kit
72