Settings; Hysteresis; Minimum Temperature Limiter - Danfoss ECtemp 316 Installation Manual

3

Settings

3�1

Hysteresis

When the thermostat is used to apply with either heat-
ing systems or refrigerating systems, and the requested
temperature is between -10 °C to +50 °C, then it is recom-
mendable also to adjust the hysteresis C according to the
requested regulating range.
As an example if the temperature is set at 18 °C and the hyster-
esis at 3 °C the thermostat will switch on at 18 °C and off at 21 °C.
For controlling of room temperature the Hysteresis is rec-
ommended to the set point of 1 °C.
3�2

Minimum Temperature Limiter

When the thermostat is used in connection with snow and
ice melting systems, it is recommendable also to use and
adjust the minimum temperature limiter (B) which ensures
8
Danfoss ECtemp 316
A Night set-back
B Minimum temperature
limiter
C Hysteresis
Installation Guide