Maxtor MaxAttach NAS 4000 Quick Start Manual

MaxAttach NAS 4000 Quick Start Card
MaxAttach
Microsoft and UNIX/Linux platforms. Ideal for your office, business or workgroup, it presents the
most cost-effective way to increase your network storage, and it eliminates the need for expen-
sive server upgrades. It also includes pre-loaded server software for plug-and-work operation.
Unit Information
Please record the following information found on the bottom of the MaxAttach unit. This
information will be needed to identify your unit for configuration or Maxtor Support.
Model Number:
Serial Number/Device ID:
Necessary Equipment for Installation
To connect, install and administer your MaxAttach NAS 4000, you will need a network
hub or switch. You will also need the following capabilities on your workstation:
Windows 95/98/NT (SP5)/2000 with network access
Internet Explorer v4.01 or later, or Netscape v4.08 or later
10/100 Mbps Ethernet Network Interface Card, (NIC)
Software drivers for the NIC
TCP/IP Enabled
CD-ROM drive
Get user manuals: See SafeManuals.com
NAS 4000 is an easy to use network rack mount storage appliance for file sharing on
™