Table of Contents
Advertisement
1- SAFETY AND
GENERAL ASPECTS
1.1 Preface
Dear user, prior to initial operation, read these operating
and maintenance instructions thoroughly to ensure safe and
economical operation.
FOLLOW OPERATING INSTRUCTIONS!
The operating and maintenance instructions contain all
information required for operation and maintenance of the
hydrant.
These operating and maintenance instructions are part of the
complete documentation.
Prior to commissioning the hydrant, all safety requirements
must be complied with.
The hydrant, shall only be operated by qualified and trained staff.
This hydrant
shall only be operated
by qualified and
trained staff.
making of any modifications to the hydrant. If the user modifies
the hydrant, this may void the manufacturer's warranty.
We reserve the right to make technical modifications to the
data and representations contained in these Operating and
Maintenance Instructions for the purpose of improving the
hydrant.
WARNING
In the event of non-compliance with
these Installation, Operation and
Maintenance manual, we shall not be
liable for any damages or operating
problems resulting therefrom.
Misuse, particularly on hydrant
pressured by liquids, can result
in personal injury and damage to
property.
If maintenance work is neglected or
carried out by untrained persons,
our warranty obligation, according
to our terms and conditions of
delivery, will not apply.
Please use only original spare parts
supplied by our company to ensure
best quality and exchangeability.
The manufacturer prohibits the
The technical data and performance may be modified
without prior notice depending on the technical advances.
1.2 Basic safety instructions
WARNING
The following chapter "Basic safety
instructions" has to be strictly observed
in order to maintain health and safety of
the operating and maintenance staff and
to ensure operativeness of the hydrant.
Non-compliance with these instructions
may jeopardise the manufacturer's duty
of guarantee and warranty.
1.2.1 Adherence to operating instructions
Prior to unloading, transport, commissioning and maintenance
of the hydrant, the operating and maintenance instructions must
be thoroughly read and strictly observed.
In the case of non-compliance with these Operating Instructions,
we will not be liable for any damage or consequences resulting
therefrom.
In addition to the operating and maintenance instructions and the
regulations concerning prevention of accidents applicable in the
user's country and place of installation, the approved technical
rules for relevant worker qualifications and safety standards
must also be adhered to.
The user's staff are responsible for ensuring that they are
familiar with the local rules concerning safety and prevention of
accidents.
The technical data pertaining to the ordered product(s) are binding
for the type of design. Modifications can only be considered
if they are specified to us in time before starting production.
Every product is checked for completeness, performance, and
tightness before leaving the factory.
1.2.2 Intended use
Due to their design and the materials used, our hydrant of
standard design are approved for those media (concentration,
pressure, temperature) which are indicated in the technical
brochure and operating instructions specific to the product.
Deviating operating instructions and fields of application are
subject to the manufacturer's approval.
1.2.3 Duties of the user
Whoever, on the user's premises is engaged in mounting,
commissioning, operation and maintenance of this hydrant,
should read the complete Operating Instructions (especially any
referenced basic safety instructions) and understand them. This
particularly applies to staff who work only occasionally.
IOM_FIH210201_HALIOS STD-PREM_EN
P2/19
Advertisement
Table of Contents
