Program Mode; Program Sequence And Default Settings; Function Keys; Setting The Lcd Contrast - La Crosse Technology WS-7395U Instruction Manual

PROGRAM MODE

Programming Note: If 30 seconds are allowed to pass, or the WIND/SNZ button is pressed during the programming mode, the
unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you
don't leave the program mode during the programming of sections IV through XI, you can advance to step 4 of the next program
setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that
setting.
I. PROGRAMMING SEQUENCE AND DEFAULT SETTINGS
The programming sequence and default (factory) settings are as follows:
LCD Contrast
Time Zone
Daylight Saving Time
Radio-controlled time reception
12/24-hour time
Time – Hour
Time – Minute
Year
Month
Day
Snooze
Temperature Format
Forecast Sensitivity
II.

FUNCTION KEYS

The function keys are located on the front of the unit directly below the LCD (Liquid Crystal Display).
III. SETTING THE LCD CONTRAST
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
Note: There are 8 LCD contrast levels to choose from—"Lcd 0" is the lightest, and "Lcd 7" is the darkest.
5
-5 (Eastern)
ON
ON
12
12
:00
2003
1
1
10 minutes
°F
2
6