Transmission Range; Cleaning And Maintenance; Specifications - La Crosse Technology WS-2310 Operation Manual

Poor contrast LCD or Check the LCD contrast setting or
no reception or low change batteries (check low battery
batteries in sensors or indicator on the LCD)
receiver.
Quite frequently interferences are only of a temporary nature and may
be easily overcome. If there are wireless headsets, remote
babysitters or other devices working on 433MHz in your house or in
the vicinity, their switch-on time is mostly limited. Furthermore most of
these devices allow the change to an interference-free frequency.
Such measures will effectively overcome interferences.
20.

Transmission Range

The transmission distance from the thermo-hygro sensor to the base
station in open space under optimum conditions is 100ft. Although
the signal transmission may travel though solid surfaces or objects,
the following points should be avoided if possible:
- High frequency interferences of any kind.
- High densities of trees.
- Broadband interferences in municipal areas can reach levels
reducing the signal/noise ratio over the entire frequency band,
thus also reducing the transmission distance.
- Devices working close by (example a neighbor's house) may
also influence reception.
- Poorly shielded PCs can cause interferences that will reduce or
in some cases stop reception
- The transmitter and receiver should not be mounted on metal
surfaces as this will reduce transmission range.
21.

Cleaning and Maintenance

- Clean the housing and screen of the base station only with a soft
damp cloth. Do not use abrasives or solvents.
- Ensure that the rain sensor does not collect leaves or other dirt
by checking the funnel for blockages every now and then. Also
clean the seesaw of the sensor with a damp cloth and check by
lightly tapping with your finger that it can move freely from side
to side.
- Do not clean the funnel with the bottom half of the rain sensor
attached nor the bottom part itself under running water. This
may bear the danger of water entering the unit's inner parts and
cause damages.
- Do not immerse the base station in water.
- Should there be damage to this product, please do not attempt
to make any repairs. Please take this unit to a qualified
technician. Opening or improper handling of the units will
invalidate any guarantee.
22.

Specifications

Outdoor data
Transmission Distance in Open Field:
Temperature Range
Resolution
Measuring Range Rel. Humidity
Rain Volume Display
Resolution
Wind Speed
Resolution
Wind Direction
Using 433MHz wireless data transmission:
Measuring interval
thermo-hygro sensor
100ft max.
: -21.8°F to +157.8°F (show
OFL" if outside range)
: 0.2°F
: 20% to 95% (if the relative
humidity is less than 20% or
greater than 95%, it will
display 19% or 96%)
: 0 to 39.37 inches (1h and
24h rainfall)
0 to 98.38 inches (Total
rainfall)
: 0.1mm
: 0 to 111.8 mph
: 0.1 mph
: Graphic Resolution 22.5
Degrees, Numerical
Resolution, Letter format
: 32 sec (if wind factor>22.36
mph) or 128sec (if wind
factor< 22.36mph) 10 minutes
(if the base station fails to
receive any data after 5
attempts in a row, all outdoor