Solving Curved Or Not Rectangular Image Problems; Solving Flipped Image Problems; Solving Small Image Problems; Adjusting A Fuzzy Or Blurry Image - Epson EH-LS800W User Manual

Solving Image Problems

Solving Curved or Not Rectangular Image Problems

If the projected image is curved or not evenly rectangular, try the following
steps until the problem is solved.
a Place the projector directly in front of the center of the screen, facing it
squarely, if possible.
Correct the distortion in the projected image by using the Installation
b
menu.
g g Related Links
• "Correcting Distortion in the Image"

Solving Flipped Image Problems

If the projected image is flipped horizontally, try the following steps until the
problem is solved.
a If you flipped the projected image using the Reverse Flip Picture
function, press the
Flexible Picture menu, and then press the
disable the function.
g g Related Links
• "Flipping the Image Horizontally (Flexible Picture)"

Solving Small Image Problems

If the projected image is too small, try the following steps until the problem is
solved.
p.42
button on the remote control to display the
button again to
p.64
a If you adjusted the size of the projected image, press the
button on the remote control to display the Flexible Picture menu, and
then press the button until the projected image is the right size.
g g Related Links
• "Changing the Image Size or Position (Flexible Picture)"

Adjusting a Fuzzy or Blurry Image

If the projected image is fuzzy or blurry, try the following steps until the
problem is solved.
a Adjust the image focus using the focus lever.
b
Position the projector close enough to the screen.
c Clean the projection window.
To avoid condensation on the lens after bringing the projector in
from a cold environment, let the projector warm up to room
temperature before using it.
a
d Adjust the Sharpness setting in the projector's Picture menu to
improve image quality.
Picture > Custom Settings > Sharpness
s
e If you have blurred the edges of the projected image using the Edge
Blur function, press the
display the Flexible Picture menu, and then press the
to disable the function.
f If you are projecting from a computer, use a lower resolution or select a
resolution that matches the projector's native resolution.
100
p.63
button on the remote control to
button