Advertisement
DOOR REMOVAL/REVERSAL INSTRUCTIONS
NOTE
The direction in which your refrigerator doors open (door swing) can be reversed, from left
to right or right to left, by moving the door hinges from one side to the other. Reversing the
door swing should be performed by a qualified person.
IMPORTANT
Before you begin, turn the refrigerator temperature control to "OFF" and remove the electrical
power cord from the wall outlet. Remove any food from door shelves.
5. Install the lower hinge on the left side of
the cabinet. Install the refrigerator door
and central hinge. Before tightening the
screws on the central hinge, ensure that
the top of the refrigerator door is level
with the cabinet and that the rubber
gasket is making a good seal. Install both
feet.
6. Install the freezer door. Install the upper
hinge on the top left side of the cabinet.
Before tightening the screws on the upper
hinge, ensure that the top of the freezer
door is level with the cabinet and that
the rubber gasket is making a good seal.
Install the screw hole cover on the top
right side of the cabinet.
Door removal and reversal
instructions for BASE
Model FFPS4533UU:
•
Ensure the unit is unplugged and empty.
•
All parts removed must be saved for
reinstallation of the door.
•
Do not lay the unit flat as this may
damage the coolant system.
•
It is better that 2 people handle the unit
during assembly.
1. Remove the hinge cover and the upper
hinge. Remove the hinge hole cover from
the top left side of the cabinet. Remove
the freezer door from the cabinet.
2. Remove the central hinge from the middle
of the cabinet. Remove the refrigerator
door from the cabinet. Remove the screw
hole cover from the left side of the cabinet
and install it in the screw holes on the
right side of the cabinet.
5
6
1
2
9
Advertisement
