Advertisement
DOOR REMOVAL/REVERSAL INSTRUCTIONS
NOTE
The direction in which your refrigerator doors open (door swing) can be reversed, from left
to right or right to left, by moving the door hinges from one side to the other. Reversing the
door swing should be performed by a qualified person.
IMPORTANT
Before you begin, turn the refrigerator temperature control to "OFF" and remove the electrical
power cord from the wall outlet. Remove any food from door shelves.
Door removal and reversal
instructions for BASE
Model FFPS3133UU:
•
Ensure the unit is unplugged and empty.
•
All parts removed must be saved for
reinstallation of the door.
•
Do not lay the unit flat as this may
damage the coolant system.
•
It is better that 2 people handle the unit
during assembly.
1. Remove the hinge cover and the upper
hinge. Remove the hinge hole cover from
the top left side of the cabinet. Remove
the freezer door from the cabinet.
2. Remove the central hinge from the middle
of the cabinet. Remove the refrigerator
door from the cabinet. Remove the screw
hole cover from the left side of the cabinet
and install it in the screw holes on the
right side of the cabinet.
3. Remove the hinge hole covers from the
top left side of the freezer and refrigerator
doors and install them in the hinge holes
on the top right side of both doors.
4. Remove both feet. Remove the lower
hinge from the cabinet. The lower
hinge must be turned over before being
reinstalled.
8
1
2
3
4
Advertisement
