Turning On The Projector - LG RL-JA20 Owner's Manual

Turning on the Projector

1
Connect power cord correctly.
2
Remove the lens cover of the projector.
Press the
3 POWER
during cooling of the lamp.)
It will take about 1 minute to display the picture after power on because the projector lamp has to
warm up.
An image will appear after the operation indicator light up(Green).
Select the source mode with the
Leave the projector plugged in for at least 2 minutes after switching off the projector, as this
will allow the lamp cooling to continue which will help to preserve the lamp life.
4 Adjust volume level.
If you press VOLUME
If you press
VOLUME
24
* Don't turn main power off and don't unplug the power cord while the ventilation
22
button on the remote control or top cover.(Green operation indicator flashes
INPUT SELECT
G
button, sound and volume level number are increased.
F
button, sound and volume level number are decreased.
fan(inlet/outlet) is working.
button.