Page 1
To deodorize your new chair For longer use (-H) leave the chair in a well Re-tighten bolts every 6 months by using ventilated area for 1-2 days the enclosed allen-key. *Using an electric drill can damage the chair. ASSEMBLY Please re-tighten bolts manually. INSTRUCTION Contents Instructions...
Page 2
Instructions TIPS! ※NOTICE GAS LIFT CYLINDER X1 Please use the allen key included instead of an electric drill. Use the box for an easier assembly. STEP 1 Bottom MAKE SURE TO REMOVE THE GAS LIFT CAP BASE LEG X1 STEP 2 Insert gas lift cylinder into the center of the base.
Page 3
User Manual Check fully tighten x 10 FRONT Tension Right hand Adjustment Tilt Lumbar Once all of the armrests bolts are in place, Match the front stickers and Down fully tighten every bolt. secure the Control Mechanism to the seat. STEP 3 This step is only for a Tilt Tension...