Table of Contents
Advertisement
Specifications
1
Radio Range
900 MHz, 1 Watt: Up to 9.6 km (6 miles)
2.4 GHz, 65 mW: Up to 3.2 km (2 miles)
Antenna Minimum Separation Distance
900 MHz, 150 mW and 250 mW: 2 m (6 ft)
900 MHz, 1 Watt: 4.57 m (15 ft)
2.4 GHz, 65 mW: 0.3 m (1 ft)
Radio Transmit Power
900 MHz, 1 Watt: 30 dBm (1 W) conducted (up to 36 dBm EIRP)
2.4 GHz, 65 mW: 18 dBm (65 mW) conducted, less than or equal to 20 dBm
(100 mW) EIRP
Antenna Connection
Ext. Reverse Polarity SMA, 50 Ohms
Max Tightening Torque: 0.45 N·m (4 lbf·in)
Spread Spectrum Technology
FHSS (Frequency Hopping Spread Spectrum)
900 MHz Compliance (1 Watt)
Contains FCC ID: UE3RM1809: FCC Part 15, Subpart C, 15.247
Contains IC: 7044A-RM1809
IFT: RCPBARM13-2283
(NOM approval only applies to 900 MHz models)
Supply Voltage
24 V DC (±10%) (use only with a Class 2 (UL) power supply or a Limited
Power Source (LPS) (CE) power supply)
Power Consumption
9 W average; 30 W maximum
Mounting
A mounting system that provides for various mounting options has been
provided with this enclosure.
To connect the mounting brackets, turn the enclosure such that the backside
is visible. Place the mounting brackets over the octagon bosses either
horizontally, diagonally, or vertically, and fasten them with the ¼"-20 x 0.25"
SS, countersunk Philips drive screws provided (torque limit = 30 in. lbs.). The
enclosure can be mounted vertically (on a wall) or horizontally (table top)
Certification
Banner Engineering Europe Park Lane,
Culliganlaan 2F bus 3, 1831 Diegem,
BELGIUM
Turck Banner LTD Blenheim House,
Blenheim Court, Wickford, Essex SS11
8YT, Great Britain
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date
of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is
returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability
for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED
(INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT
SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA
COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any
obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or
improper application or installation of this product or use of the product for personal protection applications when the product is
identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express
1
Radio range is with the 2 dB antenna that ships with the product. High-gain antennas are available, but the range depends on the environment and line of sight. Always verify your wireless
network's range by performing a Site Survey.
14
Vibration Monitoring and Predictive Maintenance Solutions Kit Quick Start Guide (MultiHop)
2.4 GHz Compliance (DX80-2400 Radio Module)
Radio module is indicated by the product label marking
Contains FCC ID: UE300DX80-2400: FCC Part 15, Subpart C, 15.247
Radio Equipment Directive (RED) 2014/53/EU
Contains IC: 7044A-DX8024
ANATEL: 15966-21-04042 Este equipamento não tem direito à proteção
contra interferência prejudicial e não pode causar interferência em sistemas
devidamente autorizados. Para maiores informações, consulte o site da
ANATEL
2.4 GHz Compliance (SX243 Radio Module)
Radio module is indicated by the product label marking
Contains FCC ID: UE3SX243: FCC Part 15, Subpart C, 15.247
Radio Equipment Directive (RED) 2014/53/EU
Contains IC: 7044A-SX243
ANATEL: 03737-22-04042 Este equipamento não tem direito à proteção
contra interferência prejudicial e não pode causar interferência em sistemas
devidamente autorizados. Para maiores informações, consulte o site da
ANATEL
Operating Conditions
HMI: 0 °C to +50 °C (+32 °F to +122 °F)
DXM: –40 °C to +85 °C (–40 °F to +185 °F)
DXM LCD: –20 °C to +80 °C (–4 °F to +176 °F)
Micro SD Card (if applicable): –25 °C to +85 °C (–13 °F to +185 °F)
90% maximum relative humidity (non-condensing)
(CE/UKCA approval only applies to 2.4 GHz models)
www.bannerengineering.com - Tel: + 1 888 373 6767
www.gov.br/anatel/pt-br/
www.gov.br/anatel/pt-br/
P/N 214301 Rev. F
Advertisement
Table of Contents
