LG 42PG60C Setup & Operation Manual page 11

Installer Menu Items 035 through 118
Menu Item Function
035 COMPPORT EN.
038 YPrPb EN.
039 REAR AUX EN
040 AUTO CAMPORT
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME M.
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 YPrPb2 EN.
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
116 VIDEO MUTE EN
117 FACT DEFAULT
Note 1: Dependent on item 093 RJP Available setting.
206-4071
Value Range Default Value
0 / 2 1
0 / 1 1
0 / 1 1
0 / 1 1
Note 1 255
0 / 1 0
0 / 1 0
0 / 1 1
0 ~ 7 2
0 ~ 7 2
0 / 1 0
0 / 1 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 / 1 1
0 ~ 5 5
0 / 1 0
0, 1, 2, 2 Set to 0 to disable RGB1. Set to 1 to enable for RGB DTV mode. Set to 2 to enable for RGB PC.
17, 18
0 / 1 1
0 / 1 0
0 / 2 1
0, 1, 2, 5, 6 0
0 / 1 1 Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
0 ~ 5 2
0 ~ 4 0
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 / 1 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
0 / 1 0
0 / 1 0
Brief Description of Function and Comments
Set to 0 to disable HDMI 1. Set to 1 for DTV, set to 2 for PC.
Set to 1 to enable display panel Component Video input jacks.
Set to 1 to enable display panel Video 1 input jack.
Set to 1 to automatically switch to Camport.
Sets the starting AUX source.
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
Set to 1 to disable Channel-Time display.
Set to 1 to enable custom color for the Channel-Time display.
Chooses custom foreground color for the Channel-Time display.
Chooses custom background color for the Channel-Time display.
If set to 1 and channel override is 0, "NOT AVAILABLE" message is displayed
when directly accessing a channel not in the TV memory channel list.
If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid M.P.I. checksum.
Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
Removes block hours setting for Parental Control and makes block permanent.
Set to 17 for one time auto configuration in DTV mode.
Set to 18 for one time auto configuration in PC mode.
If set to 1, mutes audio if no signal is present.
If set to 1, keyboard is locked out, IR is still functional.
Set to 0 to disable HDMI 2. Set to 1 for DTV, set to 2 for PC.
Set to 0 to disable. Set to 1, 2, 5 or 6 for HDMI or DVI mode. (See detailed descriptions)
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Sets the power saving mode by controlling the brightness of the picture. 0=Disabled.
Selects ATSC band.
Default 01 for physical channel scan. Set to 0 for Virtual Channel scan.
Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
Set to 0 for normal, set to 1 for Blank.
0=Normal. 1=Loads presets of all above settings.
Installer Menu
P A G E 1 1