LG 42PG60C Setup & Operation Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. 42PG60C - - 42" Plasma TV
  6. Setup & operation manual
LG 42PG60C Setup & Operation Manual

LG 42PG60C Setup & Operation Manual

Integrated tvs commercial mode
Hide thumbs Also See for 42PG60C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
42PG60C 42PG65C
Integrated TVs
Setup & Operation Guide
for
Commercial Mode
Note: All features shown within this guide may not be
available on all models.
Experienced Installer
Master TV Setup
page 6
Cloning Information
pages 7-8-9
©
Copyright 2008, LG Electronics U.S.A., Inc.

Advertisement

Table of Contents
loading

Related Manuals for LG 42PG60C

Summary of Contents for LG 42PG60C

  • Page 1 Integrated TVs Setup & Operation Guide Commercial Mode Note: All features shown within this guide may not be available on all models. Experienced Installer Master TV Setup page 6 Cloning Information pages 7-8-9 © Copyright 2008, LG Electronics U.S.A., Inc.

  • Page 2: Installer Overview

    LG Installer Remote You will need an LG Installer remote control similar to the one shown to the right. The installer remote must have a “Source” but- ton or its equivalent. The remote shown in this manual has “INPUT”...

  • Page 3: Table Of Contents

    Installer’s Menus ... . 10 - 11 - 12 - 13 - 14 - 15 Notes • See the Installer’s menus to set up the operational features of the TV. The Installer’s section content is intended to be used pri- marily by qualified electronics technicians.

  • Page 4: Typical Installer's Remote Control

    Use the MODE button to select TV and put installer remote into TV operating mode. Notes: This remote is supplied with the TV. This typical LG multi-brand remote control is shown for reference. See next page for typical key functions in TV mode.

  • Page 5: Remote Key Functions

    Remote Control Key Functions. To put remote into TV operating mode, select TV with the MODE key. Notes: This remote is supplied with the TV. This typical LG multi-brand remote control is shown for reference. Follow the instructions provided on the next page to access the Installer menus.

  • Page 6: Commercial Mode Setup

    Commercial Mode Setup for Master TV This page provides an overview of the TV configuration. See the pages listed below for more specific, detailed instructions at each step; how to access and use the Installer menu etc. Note 1: Disconnect all Aux inputs. Under certain conditions, EZ Scan (Channel search) is disabled if there is an Aux input active.

  • Page 7: Master Tv Cloning Connections And Cloning Overview

    Notes: It is assumed that the TV is connected to a signal source, the source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, all equipment is connected to power and turned on and the LT2002 Clone Programmer main menu (THE CLONE HAS CONTROL OF THE TV) menu is displayed on the TV screen, see above and next page.

  • Page 8: Cloning Learning Setup

    Since the Clone Programmer’s time cannot be set directly, the current time needs to be copied from a Zenith/LG TV equipped with M.P.I. input capability. After the time is copied to the Clone programmer, the current time can then be transferred to another TV.

  • Page 9: Cloning Connections/Teaching Setup

    TV After learning is complete, remove the M.P.I. cable from the master TV and connect it to the target TV that you want to copy the master TV’s setup into. With “THE CLONE HAS CONTROL OF TV” message displayed, press 2 or use either Channel key to go to the “TEACH TO TV”...

  • Page 10: Installer Menu

    See more detailed descriptions of the Installer menu items on the following pages... Accessing the Installer’s Menu Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote control. Just press MENU repeatedly until the TV seems to stop responding, then press 9, 8, 7, 6, then ENTER to access the Installer’s menu.
  • Page 11 If set to 1 and channel override is 0, “NOT AVAILABLE” message is displayed when directly accessing a channel not in the TV memory channel list. 0 / 1 If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel. 0 / 1 0 ~ 5 Relaxes M.P.I.
  • Page 12 Generally, this feature is used in connection with START CHANNEL (Installer item 004) where the start channel may, for example, be set to 3 or 4. If the start channel is 3, then the TV will remain locked on Channel 3.
  • Page 13 NOTE: If set to 1, 093 RJP Available is automatically set to 0. 046 - STRT AUX SRCE (Start Aux Source) Sets the starting AUX source. At power up, TV will tune to starting Aux source if item 004 Start Channel is set to 0.

  • Page 14: Installer's Menus

    075 - REVERT CH (Revert to Start Channel) If set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel. 078 - UPN MSB (UPN Most Significant Byte) User programmable number, most significant byte readable by M.P.I.
  • Page 15 • If set to 1, 2, 5 or 6, item 040 Auto Camport is automatically set to 0. Settings 1, 2, 5 and 6 allow the lodge staff to customize each TV’s RJP setup based on customer requirements. 094 - SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature on Function menu, if Function menu is available.

  • Page 16: Clonable Menu Features Chart

    Language Cinema ISM Method Low Power Lock Movie Rating TV Rating – Children Age TV Rating – Children Fantasy Violence TV Rating – General Age TV Rating – General Dialogue TV Rating – General Language TV Rating – General Sex TV Rating –...
  • Page 17 4. Proceed with Changing/Adding Labels or go to the next channel. Installer Remote Control Key Functions for Master TV Channel Editing/Labeling Menu • CHANNEL Up/Down - Tunes in the next channel in scan. • Left/Right Arrows - Select the item to change. If “I” is shown, the ICON can be changed.

  • Page 18: Editing Channel Icons/Adding Ch Labels 2-5-4 + Menu Mode 17 Detailed Instructions For Making A Master Tv

    TV Master TV setup. You will also need an LG Installer remote control similar to the one shown in the front of this manual. The installer remote must have a “Source”...

  • Page 19: Software Updating Procedure

    Procedure for Checking Software Version The software version of the TV may be checked by accessing the INSTALLER MENU. To do this, press the MENU button repeatedly until the menu display ceases to respond to MENU key presses. Then, press "9", "8", "7", "6", "ENTER/SELECT".

  • Page 20: Camport Auto Sense Operation

    (either composite Video or S-Video). When the plug is removed, the TV will switch back to the previ- ous channel or input source that the TV was using before the plug was inserted. However, if any direct access to an RF chan-...

  • Page 21: Aux Input Configuration

    TV Aux Input Configuration / Troubleshooting Possible Solution(s) After 2-5-5 + MENU, only channels included in TV controller will appear. 6 If channel is available it can be added to channel scan. If it is not available, the ‘No Signal’ message appears on the TV screen.

  • Page 22: Troubleshooting

    Normal picture, poor • Audio muted. or no sound. • Broadcast problem. Note: For other problems not caused by the TV, refer to other devices’ operating guide. P A G E 2 2 Possible Solution(s) -Turn TV on. -Power failure? -Connect Antenna/Cable signal to TV.

  • Page 23: Cloning Troubleshooting

    • TV not reset. • After cloning operations are complete, just unplug the LT2002 from the TV. • If the TV does not display a picture on the TV (blank screen) after a few seconds, just change channels. 206-4071 Reference: Cloning Procedure Troubleshooting...

  • Page 24: Troubleshooting Flow Chart

    1. Bad Analog Board. on TV 2. Bad Digital Board. Cycle the power by removing and re-connecting the AC power cord. Observe the 'POWER' LED and TV screen as soon as AC power is re-applied. Analog Board 'POWER' LED Turn On...

  • Page 25: Commercial Mode Check

    Go to Installer menu by pressing "MENU" until the TV stops responding. TV stop responding or continue to respond Continued respond TV is not in Commercial Mode Call Technical Support for Assistance 206-4071 Bad TV TV is in Stopped Commercial responding Mode.

  • Page 26: Rjp Mode Configuration

    Reference: RJP Mode Configuration P A G E 2 6 206-4071...

  • Page 27: Glossary Of Terms

    TV signals. INPUT Refers to the input jack that receives a sig- nal from a TV, VCR, DVD Player or other Audio/Video device. JACK An input or output connector on the back of a TV, VCR, DVD Player or other Audio/Video device.

  • Page 28: Back Cover

    For Customer Support/Service Please call: 1-888-865-3026 www.lgcommercial.com Marketed and Distributed in the United States by LG Electronics U.S.A., Inc. 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 206-4102 © Copyright 2008, LG Electronics U.S.A., Inc. Issue*...

This manual is also suitable for:

42pg65c

Table of Contents