Advertisement
Quick Links
ProRMP Re-amper
Owner's Manual
CAUTION: PLEASE READ THE IMPORTANT NOTICE ON
THE BACK COVER BEFORE USING THE ProRMP
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
Tel: 604-942-1001 • Fax: 604-942-1010
email: info@radialeng.com
Radial ProRMP users guide v1.2 - Part #: R870 1180 00 / 10-2021
Subject to change without notice
®
True to the Music
Advertisement
Related Manuals for Radial Engineering ProRMP
Summary of Contents for Radial Engineering ProRMP
- Page 1 THE BACK COVER BEFORE USING THE ProRMP Radial Engineering Ltd. 1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada Tel: 604-942-1001 • Fax: 604-942-1010 email: info@radialeng.com Radial ProRMP users guide v1.2 - Part #: R870 1180 00 / 10-2021 Subject to change without notice...
-
Page 2: Features And Functions
This out- Disconnects pin 1 at the XLR put provides the primary ground input and interrupts the ground path for the ProRMP. This output path between the recorder and should be connected to a properly the ProRMP ¼" output. The grounded amplifi... - Page 3 The ProRMP allows pre-recorded instrument tracks to be sent through eff ect pedals and guitar amplifi ers. You will fi nd the ProRMP fun and easy to use. Should you have any questions regarding its functions we invite you to contact us at info@radialeng.com.
- Page 4 Active Direct Box STEP 2: Driving the dry signal back to the ProRMP Connect the mixer output to the XLR input on the ProRMP. Use a good quality balanced XLR cable or microphone snake. Note that balanced cable can be run up to 300 feet without signal loss so you can keep the amp in the studio while you listen in the control room.
- Page 5 Now connect the amplifi er to the ProRMP, play the dry track and adjust the ProRMP’s LEVEL control until the volume matches the direct guitar. At this point, you have recorded a dry guitar track, inserted the ProRMP between the mixer and amp and adjusted the LEVEL control to match your guitar.
-
Page 6: Important Notice
This means that you are completely responsible to ensure the safe and proper use of the ProRMP and to clearly understand that using it confi rms you have taken full responsibility. If you are not 100% sure of your actions, please consult a qualifi ed technician for advice before using this device or connecting any of your equipment to it.