Table of Contents
Advertisement
Cabling an optional SCSI adapter
You can install an optional SCSI adapter in the server to control internal tape drives.
You can also cable a SCSI adapter to external hard disk drives. See your SCSI
adapter option documentation for complete instructions for installing a SCSI adapter
in the server and for additional information about SCSI adapters.
Note: An optional SCSI adapter or cable option is required to connect external
SCSI devices.
To cable an optional SCSI adapter, complete the following steps:
1. Install the SCSI adapter (see "Installing an adapter" on page 21).
2. Connect the SCSI signal cable to the adapter and to one or more of the
connectors on the rear of the SCSI devices.
SCSI connector
SCSI cable
SCSI adapter
3. Complete the installation of the optional SCSI adapter.
23
Chapter 2. Installing options
Advertisement
Table of Contents
