Power Up - La Crosse Technology 308-1415C Setup Manual

Power Up

1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5V Power Adapter into an outlet, and then plug it into the
Power Jack on the back of the station. Optional: Insert 2 AA batteries for
backup.
3. Once the sensor is reading to your station, place it outside in a shaded
location to protect it from the sun's heat.
Watch our sensor mounting video:
Outdoor Sensor
TX141TH-Bv4
Note: When your station is first powered on, it will automatically open the
Settings Menu showing "HELLO SET UP TIME." Use the instructions on the
following page to adjust your station's settings.
bit.ly/th_sensor_mounting
Weather Station
308-1415C
3