Oki SHD4-755AI Quick Start Manual

1/3" Color Varifocal Dome Camera
FEATURES
1. Lead (Pb) Free RoHS Compliance (SHD4-755AI model
only).
2. Equipped with SONY HQ1 DSP (SHD4-755AI model only).
3. Long life and high reliability are achieved by the use of a
CCD image device. This makes the camera 100% solid
state. An image tube is no longer needed.
4. Built-in aspherical lens
5. No focus shift in the nighttime.
6. Relatively no interference from magnetic or electrostatic
field.
7. Ease of use in any application is achieved through the
small shape.
8. Lower power consumption.
CAUTIONS
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light
as this may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper
handling could damage the camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable
temperature range for operation of this camera is between
-10 ℃ ~50 ℃ and the allowable humidity is 85%RH
maximum.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be
cleaned before lens installation or whenever the lens is
changed. Cleaning should be done by using a chamois、a
very fine soft cloth、lens tissue or cotton tipped applicator
and ethanol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified
range. (Camera must meet the specifications).
6. Objects and liquid entry
Never push objects of any kind into this camera as this
may touch dangerous voltage points of short out parts that
could result in a fire or electric shock. Never spill any kind
of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all service to qualified
servicing personnel.
SHD4-755AI
SSD4-742AI
MB-6D
Optional:
Wall Mount Bracket
8. Damage requiring service
Unplug this video product from the wall outlet and refer
service to qualified servicing personnel under the following
conditions:
①.When the power supply cord or plug is damaged.
②.If liquid has been spilled, or objects have fallen into the
video product.
③.If the video product has been exposed to rain or water.
④.If the video product has been dropped or the cabinet
has been damaged.
⑤.When the video product exhibits a distinct change in
performance.
SPECIFICATIONS
Model SHD4-755AI
Image Sensor
DSP SONY HQ1
NTSC: 811(H)×508(V)
Total Pixels
PAL: 795(H)×596(V)
Video Output
Resolution
Minimum Illumination 0.25Lux/F1.2
More than 50dB
S/N Ratio
(AGC OFF)
Synchronizing System
A.E.S.
B.L.C
A.G.C
Flickerless
The VR for adjusting the IRIS level of auto iris
DC Level
White Balance
Lead Free
Standard : F3.8mm-9.5mm/F1.2 Aspherical
Optional : F2.5mm-6.0mm/F1.3 Aspherical Auto
Lens/Angle of View
Optional: F9.0mm-22.0mm/F2.0 Auto Iris Lens
12V DC / 170mA ;
Power Supply
12V DC / 24V AC
Power Consumption
Operation Temperature
Storage Temperature
Storage Humidity
Weight
Dimensions
DIMENSION
SSD4-742AI
1/3" SONY Super HAD CCD
SONY
NTSC: 537(H)×505(V)
PAL: 537(H)×597(V)
1.0Vp-p composite/75Ω
550TVL 420TVL
0.15Lux/F1.2
More than 48dB
(AGC OFF)
Internal
ON/OFF
lens
AWB 2500°K ~ 9200°K
YES N/A
Auto Iris Lens /74.2°~30.0°
Iris Lens /108.2°~47.6°
/29.2°~13.0°
Standard: Standard:
12V DC/150mA ;
Optional: Optional:
12V DC/ 24V AC
2.0W 1.8W
-10°C ~+50°C
-20°C ~ +60°C
Maximum: 85%RH
12Vdc: 300g ; 12Vdc/24Vac:370g
118(DIA) × 88(H) mm
OKIUSA Rev.03/06