Cloning Connections/Teaching Setup - LG 26LH1DC1 Installation And Operating Manual

CLONING CONNECTIONS/TEACHING SETUP

Teaching the Master Setup to Another 26LH1DC1
- Connections for the LT2002 to Teach another 26LH1DC1 the Master Setup
Antenna
or CATV
Teach Master 26LH1DC1's Setup to the target
26LH1DC1
After learning is complete, remove the M.P.I. cable from the
master 26LH1DC1 and connect it to the target 26LH1DC1
that you want to copy the master 26LH1DC1's setup into.
With "THE CLONE HAS CONTROL OF TV" message
displayed, press 2 to go to the "TEACH TO TV" option,
press ON/OFF, POWER, or ENTER.
Select the LT2002 memory that the new setup is in. Press
On/Off to transfer the new setup and other information to
the new 26LH1DC1. Teaching usually takes 2-3 minutes.
After the "TEACHING COMPLETE" message is displayed,
press any button to return to the Clone menu, then press
ON/OFF, POWER, or ENTER. If finished, detach M.P.I. cable
from the target, newly cloned 26LH1DC1.
Disconnect 26LH1DC1 Power for 15 Seconds
Unplug the AC power cord of the newly cloned 26LH1DC1
from the power outlet for about 15 seconds to activate the
newly-copied setup.
Master 26LH1DC1
Ferrite Core
(TDK, ZCAT
2035-0930)
Clone Programmer
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
- TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
- TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
This menu should appear after any key is
pressed on the Installer remote.
TEACHING IN PROGRESS,
PLEASE WAIT
This display will appear during Teaching
function.
TEACHING COMPLETE
This display will appear after Teaching is
complete.
59