Table of Contents
Advertisement
# of
Factory
Feature
flicks and
setting
chirps
Add a New
Remote to
Channel 3
15
—
(silent
arm/disarm)
Add a New
Remote to
Channel 4
16
—
(remote
accessory)
Add a New
Remote to
Channel 5
17
1sec.
(remote
valet mode)
Erase all
19
—
channels
Adding new remote controls
For other drivers in your family, or if you wish to control Eagle II systems on your
other cars with the same remote control, you can buy additional remote controls
from any Authorised Clifford Dealer and program them into the system yourself.
Each Eagle II will respond to as many as four 4-button/12-channel ACG remote
controls. To add a new remote control to the system, use the procedures noted in the
User-selectable features section on pages 14-15.
How to erase the codes of lost or stolen remote controls
If one of your remote controls is ever lost or stolen, you can erase its digital codes
from the system memory to make sure that the missing remote control can never be
used to disarm your system. To do so, use the "Erase all channels" feature (see
User-selectable features on pages 14-15). This will clear all remote control codes
from the system memory. Then simply program each remaining and/or replacement
remote control as noted in the Adding new remote controls section above.
© Copyright Clifford Electronics, Inc., 1996
Secondary
completion
action
confirmation
Press remote control button 3
Press remote control button 4
Transmit channel 5
(LevelShift button once,
then button 1)
—
Program
Result
Button 3/channel 3 code
3 chirps
of the new remote control
has been memorised
Button 4/channel 4 code
4 chirps
of the new remote control
has been memorised
Channel 5/remote valet code
5 chirps
of the new remote control
has been memorised
All channels have been
2 chirps
erased, program in new
remote control(s)
31-084D/E2OM/496
Advertisement
Table of Contents
