Upgrade System Memory; Upgrade To Different Memory - Intel NUC 12 Pro User Manual

3.0

Upgrade System Memory

The Intel® NUC 12 Pro Mini PC NUC12WSK has two 260-pin DDR4 SO-DIMM sockets.
Pre-installed memory
Intel® NUC 12 Pro Mini PC NUC12WSKi3
Intel® NUC 12 Pro Mini PC NUC12WSKi5
Intel® NUC 12 Pro Mini PC NUC12WSKi7
To upgrade memory, be sure to select memory modules that meet these
requirements:
•
•
•
Find compatible memory modules in the Intel Product Compatibility Tool:
•
•
•
NOTE
3.1

Upgrade to Different Memory

1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer.
3. Turn off the computer and disconnect the power cord.
4. Remove the computer's bottom chassis cover.
5. Remove the pre-installed memory module
a.
b. Holding the module by the edges, lift it away from the socket, and
6. Install the new memory module
a.
b. Insert the bottom edge of the module at a 45 degree angle into
c.
Intel® NUC 12 Pro Mini PC NUC12WSK
User Guide – August 2022
1.2V low voltage memory
2133/2400/3200 MHz SO-DIMMs
Non-ECC
Intel® NUC 12 Pro Mini PC NUC12WSKi3
Intel® NUC 12 Pro Mini PC NUC12WSKi5
Intel® NUC 12 Pro Mini PC NUC12WSKi7
If you plan to install only one memory module, install it in the lower
memory socket.
Gently spread the retaining clips at each end of the memory socket, which
causes the module to pop out of the socket (C).
store it in an anti-static package.
Align the small space at the bottom edge of the memory module
with the key in the socket.
the socket (A).
When the module is inserted, push down on the outer edges of
2x 4GB DDR4-3200 SODIMMs
2x 4GB DDR4-3200 SODIMMs
2x 8GB DDR4-3200 SODIMMs
8