Table of Contents
Advertisement
PPPoE
If your DSL provider says
that you are connecting
through PPPoE or if you nor-
mally enter a user name and
password
to
access
the
Internet, perform these steps:
A. Select PPPoE as the
Internet Connection Type,
as shown in Figure 5-6.
B. Enter the User Name.
C. Enter the Password.
D. When finished making your changes on this tab, click the Save Settings
button to save these changes, or click the Cancel Changes button to undo
your changes.
E. Click the Status tab, and then click the Connect button.
F. Proceed to step 4.
RAS (for SingTel)
RAS (shown in Figure 5-7) is
a service used in Singapore
only. If you are using a RAS
connection, check with your
ISP for the necessary setup
information.
When you are finished, pro-
ceed to step 4.
20
Figure 5-6
Figure 5-7
PPTP
PPTP (shown in Figure 5-8)
is a service used in Europe
only. If you are using a PPTP
connection, check with your
ISP for the necessary setup
information.
A. When finished making
your changes on this tab,
click the Save Settings
button
to
save
these
changes, or click the
Cancel Changes button
to undo your changes.
B. Click the Status tab, and
then click the Connect button.
C. Proceed to step 4.
Heart Beat Signal
Heart Beat Signal (shown in
Figure 5-9) is a service used
in Australia only. If you are
using a Heart Beat Signal
connection, check with your
ISP for the necessary setup
information.
A. When finished making
your changes on this tab,
click the Save Settings
button
to
save
these
changes, or click the
Cancel Changes button
to undo your changes.
B. Click the Status tab, and then click the Connect button.
C. Proceed to step 4.
Figure 5-8
Figure 5-9
21
Advertisement
Table of Contents
