Contents of Revision of SPARC M10
Systems Domain Configuration Guide
This section describes the contents of revision of the SPARC M10 Systems Domain
Configuration Guide.
Table 8-6
Contents of Revision of SPARC M10 Systems Domain Configuration Guide
Section number
Preface
3.6
4.3.2
Contents of revision
The URL of Fujitsu documents provided in "Related Documentation" will be
changed as follows:
Fujitsu documents
■
http://jp.fujitsu.com/platform/server/sparc/manual
The URL of the Japanese web site provided in "Documentation Feedback" will be
changed as follows:
Japanese site
■
http://jp.fujitsu.com/platform/server/sparc/manual
"Settable mode" in "Power save function" in "Table 3-5 Settable mode for PPAR" will
be changed to the following:
Enable/Disable (default value)
The description of "ldom" in "ldm add-vds command" in "4.3.2 Setting the default
service" will be changed to the following:
ldom
■
Specifies the name of the logical domain. The name of the control domain is
"primary". If a logical domain other than the control domain is specified, that logical
domain will be the output destination for the console.
Execute the ldm add-vcc command, and then use the svcadm enable command for
the logical domain specified by the ldm add-vcc command to enable the virtual
network terminal server daemon (vntsd).
# svcadm enable svc:/ldoms/vntsd
Chapter 8 Contents of Revision of Documentation
119