Tyres And Mounting; Maintenance And Care - Sunrise Medical Quickie Sopur Easy Max Directions For Use Manual

7.0 Tyres and mounting

WARNING:
Always make sure that you maintain the correct
tyre pressure (min. 3.5 bar) as this can have an effect on
wheelchair performance.
If the tyre pressure is too low, rolling resistance will increase,
requiring more effort to move the chair forward. Low tyre
pressure also has a negative impact on maneuverability.
WARNING:
If the tyre pressure is too high, the tyre could burst.
The correct tyre pressure for a given tyre is printed on the
surface of the tyre (min. 3.5 Bar).
Tyres can be mounted the same way as an ordinary bicycle tyre.
Before installing a new inner tube, you should always make sure
that the base of the rim and interior of the tyre
are free of foreign objects.
Check the pressure after mounting or repairing a tyre.
It is critical to your safety and to the wheelchair's performance
that regulation air pressure be maintained and that tyres are in
good condition.

8.0 Maintenance and Care

Safety Check
As the user you will be the first person to notice any possible
defects. We therefore recommend that before each use, you
check the following:
that the tyre pressure is correct.
that the brakes work correctly.
that all removable parts are securely fastened (e.g. armrests,
footrest hangers, quick-release axles ...).
if there is any damage/defect, please contact your authorised
dealer.
Maintenance and care
Maintenance:
• Check the tyre pressure at regular intervals.
• Check all tyres for wear and damage at regular intervals, at
least annually. Change the tyres as soon as there is any
sign of damage or wear.
• Check the seat and back sling for wear and damage at
regular intervals, at least annually. Change these items as
soon as there is any sign of damage or wear.
• Check all frame and backrest components for wear and
damage at regular intervals, at least annually. Change
these items as soon as there is any sign of damage or
wear.
• Check the brakes for wear and damage at regular intervals,
at least annually. Check that they are working properly and
are easy to use. Change the brakes as soon as there is any
sign of damage or wear.
• Check to make sure all bolts are secure (see the section on
torque) at regular intervals, at least annually. All screws
which are critical to using the wheelchair safely have safety
nuts. Safety nuts should only be used once and should be
replaced after use.
NOTE:
If torque settings are given, then we strongly recommend that
you use a torque measuring device, in order to check that you
have tightened to the correct torque.
20 EASY MAX
Care:
Please use only mild household cleaners when your wheelchair
is dirty. Use only soap and water when cleaning the seat
upholstery and lap belt.
Depending on the frequency and type of use, we recommend
taking your wheelchair to your authorised dealer regularly, but
at least within a year, to have it maintained by trained
personnel.
CAUTION:
Sand, salt and sea water can damage the bearings of the front
and rear wheels. Clean and dry the wheelchair carefully, after
they have been exposed to these elements.
Hygiene when being reused:
When the chair is to be reused, it should be prepared carefully,
and be wiped and treated with spray disinfectant on all surfaces
which could come into contact with the user.
If you need to do this quickly, you must use a liquid, alcohol-
based disinfectant suitable for medical products and devices.
Please pay attention to the manufacturer's instructions of the
disinfectant you are using.
In general, a safe disinfectant cannot be guaranteed on seams.
We therefore recommend that you properly dispose of seat and
back slings in the case of microbacterial contamination with
active agents according to §6 infection protection law.
Storage:
The wheelchair should always be stored in a dry place.
Spare Parts:
The following parts can be removed and sent back to the
manufacturer/dealer for repair:
• Rear wheels
• Armrest
• Footrest holder
• Anti-Tip tubes
These components are available as spare parts. For further
information, please see the spare parts catalogue.
Rev.E